SuperSweep64 - dirac
SuperSweep64 - dirac
SuperSweep64 - dirac
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Features and Functions<br />
5. Select OK.<br />
6. Choose the Select 485 Address button.<br />
The program presents a drop-down list of the Slave IDs<br />
(Addresses) for each SS64 on the network.<br />
7. Select a Slave ID.<br />
The program makes the connection with the selected SS64. You<br />
can now communicate with this unit using the PC controls.<br />
See Single SS64 and Resolve Connection Problems sections.<br />
Resolve Connection Problems<br />
For instructions on how to set up the connection between the PC and<br />
one or more SS64 units, see Setup Communications.<br />
If the program is unable to connect to the SS64, the following dialog<br />
box displays.<br />
Figure 3-12. Unable to Connect Message<br />
If you do not need to connect to the SS64, select OK then select<br />
Close.<br />
If you do need to connect to the SS64, you must resolve the connection<br />
problem.<br />
Connection to One SuperSweep 64 (RS232)<br />
To resolve a connection problem, verify that:<br />
1. You are using a RS232 cable and that it is connected to the RS232<br />
port (female) on the SS64.<br />
46 6/6/02 Temescal SuperSweep