product list - Texas Knifemaker's Supply

HANDLE FASTENERS, RIVETS, POMMELS
TEXAS SEALS
TANG NUTS
BRASS POMMELS
TXSEAL1 TXSEAL2 TXSEAL3
TXSEAL4 TXSEAL5 TXSEAL6
These seals are available in several different
sizes and finishes. They are generally used on
the handle material as an inlay. TXSEAL1. 2. 3.
4 amd 5 have “The State of Texas” inscribed on
the surface of the seal. TXSEAL6 has “Texas
Rangers” inscribed on the surface of the seal.
The seals are approximately 1/16” thick.
CAT. NO. ITEM PRICE
TXSEAL1.... Gold Finish 7/16”.................$5.00
TXSEAL2.... Silver Finish 7/16”..................5.00
TXSEAL3.... Black & Gold Finish 3/4”........8.95
TXSEAL4.... Black & Silver Finish 3/4”......8.95
TXSEAL5.... Gold Star on Silver 11/16”.....8.95
TXSEAL6.... “Texas Rangers” Gold 3/4”....8.95
200B
300B
CORBY FASTENERS
250B
350B
Sold as one bolt plus one nut. Heads are slotted
1/4” and 5/16” diameter with 7/32” diameter
shaft. These look like pins when finished. Use
step drill #3 for the 1/4” and step drill #2 for the
5/16”.
CAT. NO. ITEM
PRICE
200B.........ALUMINUM 5/16”.................. $2.00
250B.........ALUMINUM 1/4”...................... 2.00
300B.........BRASS 5/16”........................... 2.00
350B.........BRASS 1/4”............................. 2.00
400B.........STAINLESS STEEL 5/16”........ 2.25
450B.........STAINLESS STEEL 1/4”.......... 2.25
500B.........NICKEL/SILVER 5/16”............. 3.50
550B.........NICKEL/SILVER 1/4”............... 3.50
SCREW TYPE FASTENERS
600SB
700SB
Sold as one bolt plus one nut. These are probably
the easiest to use of the bolts. Bolt heads
are 5/16” diameter with 5/32” diameter threaded
shafts. Slotted. Use step drill #1.
CAT. NO. ITEM
PRICE
600SB.......BRASS BOLT......................... $1.75
700SB.......NICKEL/SILVER...................... 2.65
800SB.......STAINLESS STEEL................. 1.75
#1 #2
TN101 TN102
#1 This little brass nut fits most of the high
carbon steel hidden tang blades. Threaded
10/24. It is slotted on one end for tightening up
the handle.
CAT. NO. ITEM PRICE
TN101.........10mm dia., 8mm tal............. $0.95
#2 This is the little brass nut that fits the Japanese
blades that are threaded 10/32 as in blade
numbers 527, 525, and 452. This one has a slot
on one end for tightening up the handle.
CAT. NO. ITEM PRICE
TN102..........3/8” dia., 1/4” long.............. $0.95
LOVELESS FASTENERS
Sold as one stainless steel screw and two brass
nuts. Screw is 1-3/16” long and nuts are 5/16”
diameter. Use step drill #1. When assembled just
grind off the screw head and whatever is left of
the other end. You should end up with a stainless
dot inside a brass ring.
CAT. NO ITEM PRICE
BBS1........... 1.......................................... $1.50
RIVETS
Sold in a pair of one male part and one female
part. Brass rivets with 5/16” diameter head and
5/8” long shaft. Usually for use on kitchen or
patch knives. Use #1 step drill for correct head
setting. Nickel/silver rivets have 5/16” diameter
head and 1/2” long shaft.
BRASS (5/8” long shaft)
CAT. NO. PAIR / 1 F,1 M PRICE
R800R........................... 1......................... $0.16
R800R50..................... 50.......................... 7.50
R800R100.................. 100....................... 12.95
R800R500.................. 500....................... 56.00
NICKEL/SILVER (1/2” long shaft)
CAT. NO. PAIR / 1 F,1 M PRICE
R900R........................... 1 $0.35
R900R50.................... 50......................... 15.95
R900R100.................. 100....................... 28.95
R900R500.................. 500..................... 122.50
KNIFE SHOWS
See the shows we will be attending
at texasknife.com.
We hope to see you there!
301 302 303 304 305
These beautiful brass pommels have a center
drilled base threaded with a 1/4” x 20 tap.
CAT. NO. ITEM PRICE
POM301......BRASS POMMEL............. $10.95
POM302......BRASS POMMEL............. 10.95
POM303......BRASS POMMEL............. 10.95
POM304......BRASS POMMEL............. 10.95
POM305......BRASS POMMEL............. 10.95
POMMELS 1” DIA.
These solid pommels are not tapped. They
have a 1” diameter base. The pointed pommel
is 1-1/8” in height. The oval pommel is 3/4” in
height and the ball pommel is 1-1/8” in height.
CAT. NO. ITEM PRICE
POM153......BRASS POINTED......................$9.95
POM154......BRASS OVAL...............................9.95
POM155......BRASS BALL...............................9.95
POM163......NICKEL/SILVER POINTED.......12.95
POM164......NICKEL/SILVER OVAL.............12.95
POM165......NICKEL/SILVER BALL...............12.95
BRASS POMMELS
POM203 POM202 POM201
These brass pommels are precision turned.
They fit hidden tang blades. (Need 10mm “tang
nuts”).
CAT. NO. ITEM PRICE
POM201...... SM BRASS POMMEL.........$5.95
POM202......MED BRASS POMMEL.........6.95
POM203......LG BRASS POMMEL............7.95
CAST POMMELS
POM151 POM152 POM161 POM162
The large pommel is 5/8” high by 1-1/8” at
its base tapering to 3/4” at the top. The small
pommel is 3/8” high by 7/8” diameter at its base
tapering to 3/4” at the top.
CAT. NO. ITEM PRICE
POM151 ...........BRASS SMALL.............. $4.95
POM152 ...........BRASS LARGE................ 5.95
POM161............N/S SMALL...................... 5.50
POM162............N/S LARGE...................... 5.95
Texas knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 11