product list - Texas Knifemaker's Supply

STAINLESS STEEL BLADES
BABY CAPE SKINNER
HUNTERS DELIGHT
Cryogenically treated 440C stainless steel 4-1/2” overall length, 2” long
blade which is satin finished and hollow ground, 1” width, 1/8” thick, and
takes (3) 5/32” diameter pins. Don’t let the name or size fool you. It is one
of our smallest knives ever, but it is perfectly capable of getting the job
done. No sheath offered at this time.
CAT. NO. ITEM PRICE
BL712C...........................BLADE W/DEEP.....................................$12.95
CRYOGENIC TEMPERING (-305 o F)
MAVERICK
7-5/8” overall length, 3-1/2” long blade, 7/8” wide and a little over 1/8” thick.
Hollow grind clip point with a nice false edge. Other features are the same
as BL532. Uses Guard #532/533. FITS SHEATH # 3.
CAT. NO. ITEM PRICE
BL533......................... BLADE ONLY............................................ $20.95
BL533C....................... BLADE W/DEEP......................................... 24.45
CRYOGENIC TEMPERING (-305 o F)
GN532/533.................. Guard-Nickel Silver with pin.......................... 9.95
JUDGES FAVORITE BLADE OR KIT
Sample of Blade 543 finished with bolster and Cocobolo handle
9-3/4” overall length, 4-1/2” long blade, 1-3/8” wide, 3/16” thick extra fine
drop point blade. Mirror polished, hollow ground extra-fine 8A stainless
steel with finger grooves and tapered tang. Has terrific edge holding. Use
any of our bolts or 3/16” diameter rods for pins. Thong hole is 1/4” diameter.
USE SHEATH #11. Use bolster #543.
CAT. NO. ITEM PRICE
BL543.................... BLADE ONLY ................................................ $29.95
BL543C.................. BLADE W/DEEP CRYOGENIC....................... 33.45
TEMPERING (-305 o F)
BO543N................. BOLSTER #543 – pre-drilled with pins.............. 9.95
Nickel/silver. Sold per set.
BEAVER SPECIAL
7-1/2” overall length, 3-1/4” long blade, 1-1/8” maximum width, nice looking
blade. Great vanadium stainless steel hollow ground and satin finished to
perfection. All holes are 1/8” diameter. FITS SHEATH #3.
CAT. NO. ITEM PRICE
BL535.....................BLADE ONLY................................................ $37.95
BL535C...................BLADE W/DEEP..............................................41.45
CRYOGENIC TEMPERING (-305 o F)
SABINE HUNTER
Epoxy and
handle material
included in kit.
Pre-machined
cocobolo scales
available as an
upgrade
The BLADE is 8-3/4” overall length, 4” long blade, 1-1/8” wide, 5/32”
thick, satin finished and hollow ground 6A high carbon stainless steel.
Thumb grooves on top for extra grip and a nice tapered tang. Truly a fine
blade. All of our bolts fit or use 3/16” diameter rods. Thong hole is 1/4”.
Use guard #545.
The KIT consists of the blade, the #545 guard, (2) 3/16” diameter nickel/
silver pins, cut to fit, Dymondwood handle material (3/8” thick x 1-1/2”
wide x 5” long) in your choice of color, 30 minute epoxy and instructions
to assemble your knife. Thong hole tubing needs to be ordered separately
if you desire a thong hole.
Blade fits SHEATH #2.(Not included in kit.)
CAT. NO. ITEM PRICE
BL545...............BLADE ONLY....................................................... $19.95
BL545C.............BLADE W/CRYO TEMPERING (-305 o F)............... 23.45
BL545K.............BLADE KIT............................................................. 31.95
BL545KC..........BLADE KIT W/CRYO TEMPERING (-305 o F)......... 35.45
G545.................GUARD #545........................................................... 9.95
BL545COCO....SET OF COCOBOLO SCALES............................. 19.95
PRE-MACHINED (UPGRADE)
8-5/8” overall length, 4-3/8” long blade, 1/8” thick, and 1” wide satin finished
vanadium stainless steel blade. Bolster holes are 1/8” diameter and tang
holes are 5/32” diameter. Fine looking false edge and great hollow grind
give it a good balance. FITS SHEATH #2.
CAT. NO. ITEM PRICE
BL539.................... BLADE ONLY................................................. $39.95
BL539C.................. BLADE W/DEEP.............................................. 43.45
CRYOGENIC TEMPERING (-305 o F)
TEXAS UTILITY
8-3/4” overall length, 4-1/2” long blade, 7/8” wide, and 1/8” thick. Available
in vanadium stainless steel that is hollow ground with a satin finish. Bolster
holes are 1/8” diameter and tang holes are 5/32” diameter. This is a neat
utility that can double as a steak knife.
CAT. NO. ITEM PRICE
BL540.....................BLADE ONLY................................................$39.95
BL540C...................BLADE W/DEEP..............................................43.45
CRYOGENIC TEMPERING (-305 o F)
Texas knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 61