product list - Texas Knifemaker's Supply

HEAT TREAT OVENS & SUPPLIES
PARAGON OVENS
CAT. NO.
PRICE
KM-14D.....................................................................$1275.00
Interior firing chamber of the oven is 5-1/2” wide x 4-1/4” high
x 14-1/2” deep. Maximum temperature is 2000 degrees. 120
volts, 10 amps, 1200 watts. Includes complete instructions.
Approx. shipping weight is 100 lbs.
CAT. NO.
PRICE
KM-24D.....................................................................$1540.00
Interior firing chamber of the oven is 5-1/2” wide x 4-1/4” high
x 24” deep. Maximum temperature is 2000 degrees. 240 volts,
7.5 amps, 1800 watts. Includes complete instructions. Approx.
shipping weight is 140 lbs.
CAT. NO.
PRICE
KM-36D...................................................................................... $1775.00
Interior firing chamber of the oven is 5-1/2” wide x 4-1/4” high x 36” deep.
Maximum temperature is 2000 degrees. 240 volts, 11 amps, 2700 watts.
Includes complete instructions. Approx. shipping weight is 190 lbs.
CAT. NO.
PRICE
HTKIT............................$74.95
Knifemaker’s heat treating kit
contains 1 pair of hot gloves
(only for handling objects up to
400 degrees), 1 heat treating
fork, 4 knife holders, and 8 fire
brick supports.
HEAT TREATING KIT
HEAT TREATING FORK
CAT. NO. ITEM PRICE
HTFORK................................ Heat Treating Fork.......................... $29.00
Easily removes knife holders and blocks from the hot furnace. A sliding
wooden handle allows you the most comfortable position for holding the
fork. 31” long.
HEAT TREATING GLOVES
CAT. NO.
PRICE
HTGLOVES............................ $41.00
For intermittent handling of hot objects
up to 400 degrees. Sold in pairs. Not
intended for handling hot blades!
CAT. NO.
PRICE
HTKH...............$10.50 EACH
High temperature pins pressed
into a ceramic base. They hold
the foil wrapped blades on
edge so that heat can circulate
around the blade. Sold per
each knife holder.
KNIFE HOLDER FOR OVEN
SAFETY GLASSES FOR HEAT TREATING
CAT. NO.
PRICE
HTSG................................................$19.95 each
Protect your eyes with firing glasses. They are
coated to filter infra-red and ultra-violet light and
also to protect your eyes from heat and glare.
ANVIL STAND
ANVIL
Made in the USA
All anvils are designed by Dilton Emerson. The anvils are made of 41/40
tool steel and the entire anvil is heat treated to 48-50c Rockwell.
CAT. # SIZE PRICE
ANVL-TR1 100 LB $585.00
Face - 12-5/8” x 4”
Horn – 8-1/2”
Height – 10”
Base – 8-3/4” x 9”
CAT. # SIZE PRICE
ANVL-TR 150 LB $795.00
Face - 16-3/4” x 4-3/16”
Horn – 10-3/16”
Height – 11-3/8”
Base – 10-3/8” x 9-7/16”
CAT. #
PRICE
ANST-TRH.........................$200.00
This stand is built to support the
100, 150 and 200 lb. anvils made
by Dilton Emerson.
CAT. # SIZE PRICE
ANVL-TR2 200 LB $1060.00
Face - 17-1/2” x 4-1/4”
Horn - 10-1/2”
Height - 12”
Base - 10-1/4 x 12-1/2”
CAT. NO. PRICE/EA
HTFIRE...........................$5.00
Sold per each support. Position
each firebrick support under the
knifeholders inside the furnace,
so that you can slide the fork
under the holders.
FIRE BRICK SUPPORTS
BLACKSMITH HAMMER
The blacksmith hammer is made by Plumb ® and is available in a 40 oz.
and 48 oz. weight. The handle is hickory.
CAT. NO. ITEM PRICE
BLAC-2.................................. 40 oz................................................$29.95
BLAC-3.................................. 48 oz..................................................34.95
Texas knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 5