product list - Texas Knifemaker's Supply

STAINLESS STEEL BLADES & KNIFE KITS
BOONE & CROCKETT SKINNER BLADE OR KIT
LAREDO SKINNER BLADE OR KIT
The BL408 example above is shown
with Dymondwood handle material.
Available as blade or kit
with blade.
The BLADE has a mirror finish made from high carbon 6A stainless. The
300B, 400B, or 500B hidden bolts are a great choice for pin material, or
use the 3/16” rod and 1/4” thong hole tubing. The overall length of the
blade blank is 7-3/4”, the blade is 3-3/4” wide and 5/32” thick. The bolster
holes are 3/32”. Use SHEATH #4. The KIT comes with the blade, pin and
thong hole tubing, Dymondwood handle material in your choice of color,
30 minute epoxy and instructions to assemble your knife.
CAT. NO. ITEM PRICE
BL408......................BLADE ONLY................................................ $20.95
BL408C................... BLADE W/DEEP CRYOGENIC....................... 24.45
TEMPERING (-305 o F)
BL408K................... BLADE KIT...................................................... 25.95
BL408KC................ BLADE KIT W/CRYO TEMP (-305 o F)............. 28.45
TEXAS SKINNER BLADE OR KIT
BLADE blank is 7-5/8” overall
in length, with a blade that is
3” long, 1-1/4” wide, and 5/32”
thick. Very slight upswept
point makes this blade especially
good for skinning. Highly
polished 6A high carbon stainless
with better edgeholding.
FITS SHEATH #3.
The KIT consists of the blade,
Dymondwood scales, 3/8”
Available as blade or kit with blade. thick x 1-1/2 wide x 5” long
(your choice of colors), (2) brass 1/4” dia. pins precut to fit, 30 minute
epoxy, and instructions to assemble your knife.
CAT. NO. ITEM PRICE
BL409..................... BLADE ONLY................................................ $20.95
BL409C................... BLADE W/DEEP CRYOGENIC....................... 24.45
TEMPERING (-305 o F)
BL409K....................BLADE KIT..................................................... 26.95
BL409KC.................BLADE KIT W/CRYO TEMP (-305 o F)............. 29.45
SAM HOUSTON SKINNER BLADE OR KIT
Available as blade or
kit with blade.
The BLADE blank is
8-1/4” in overall length,
with a blade length
that is 3-5/8”, width of
1-1/16” and thickness of
5/32” . There are three
5/32” diameter holes
for rods or pins. Blade
is slightly dropped at
point. Made of 6A high carbon stainless steel for better edge holding, this
blade is hollow ground and highly polished.The KIT contains Dymondwood
scales, (3/8” thick x 1-1/2” wide x 5” long) in your choice of color, (3) brass
5/32” dia. pins precut to fit, 30 minute epoxy, and instructions to assemble
your knife. FITS SHEATH #3.
CAT. NO. ITEM PRICE
BL410..................... BLADE ONLY................................................ $20.95
BL410C................... BLADE W/DEEP CRYO TEMP (-305 o F)......... 24.45
BL410K................... BLADE KIT...................................................... 26.95
BL410KC................ BLADE KIT W/CRYO TEMP (-305 o F)............. 29.45
58
The BLADE blank is 9” in overall length, with a blade that is 4-3/4” long,
1” wide and 5/32” thick. Narrow trailing point design and good balance
makes this one perfect for most camping and hunting needs. 6A high
carbon stainless steel. Tangs are prepared with three 5/32” holes for pins,
rivets, or bolts of the SB type. FITS SHEATH #2.
The KIT consists of the blade, Dymondwood scales, 3/8” thick x 1-1/2 wide
x 5” long (your choice of colors), (3) brass 5/32” dia. pins precut to fit, 30
minute epoxy, and instructions to assemble your knife.
CAT. NO. ITEM PRICE
BL411...................... BLADE ONLY............................................... $20.95
BL411C.................... BLADE W/DEEP CRYOGENIC...................... 24.45
TEMPERING (-305 o F)
BL411K.................... BLADE KIT..................................................... 26.95
BL411KC................. BLADE KIT W/CRYO TEMP (-305 o F)............ 29.45
BRAZOS SKINNER BLADE OR KIT
Available as blade or kit with
blade.
The BLADE blank is 8-7/8” in
overall length, 4-1/4” long blade,
1-1/4” wide at ricasso and 5/32”
thick. Beautiful hollow grind and
very highly polished which not only
looks good, but is easy to sharpen.
The integral finger groove in the
handle (typical in this group of
blades) makes it unnecessary to
add a special guard and saves time. Upswept blade made of super 6A
high carbon stainless steel. FITS SHEATH #11.
The KIT consists of the blade, Dymondwood scales, 3/8” thick x 1-1/2 wide
x 5” long (your choice of color), (3) brass 5/32” dia. pins precut to fit, 30
minute epoxy, and instructions to assemble your knife.
CAT. NO. ITEM PRICE
BL412...................... BLADE ONLY............................................... $20.95
BL412C.................... BLADE W/DEEP CRYOGENIC...................... 24.45
TEMPERING (-305 o F)
BL412K.................... BLADE KIT..................................................... 26.95
BL412KC................. BLADE KIT W/CRYO TEMP (-305 o F)............ 29.45
PECOS BULLNOSE SKINNER
The overall length of this skinner is 7-3/4”. It has a 3-1/2” satin finished,
hollow ground 440C blade. FITS SHEATH #4. Handle material not included.
Optional bolster. Use drill #31. BO422 may be used.
CAT. NO. ITEM PRICE
BL422...................... BLADE ONLY............................................... $25.95
BL422C.................... BLADE W/DEEP CRYOGENIC...................... 30.45
TEMPERING (-305 o F)
BO422...................... N/S BOLSTER AND PINS................................ 9.95
Texas knifemaker’s supply order on-line www.texasknife.com fax (713) 461-8221