product list - Texas Knifemaker's Supply

More documents

Recommendations

Info

STAINLESS STEEL FILLET BLADES FINEST FILLET BLADE OR KIT BASS TOURNAMENT FILLET Example shown uses Blue Lagoon Tiger Sripe Resinwood handle material. Tiger Stripe Resinwood is an upgrade and will add to the cost of the kit. Please call for kit price. Dymondwood scales in your choice of color and 30 min. epoxy included in kit. Available as blade or kit with blade. The BLADE is 12” overall length, 7” long blade, 3/4” wide and just under 1/8” thick, flat ground and satin finished, 440C stainless steel. Even, 1-7/8” of serrations for heads and tails. Holes for all bolts or rods are 3/16” diameter. Thong hole is 1/4” diameter. Use guard GN546. The KIT consists of blade, GN546 nickel/silver guard, (3) 3/16” diameter nickel/silver pins cut to fit, (1) 1/4” nickel/silver thong hole tubing cut to fit, Dymondwood handle material (3/8” thick x 1-1/2”wide x 5” long) in your choice of color, 30 minute epoxy and instructions on how to assemble your knife. BLADE FITS SHEATH #19. CAT. NO. ITEM PRICE BL546.................... BLADE ONLY................................................. $19.95 BL546C.................. BLADE W/CRYOGENIC TEMPERING............ 23.45 BL546K.................. BLADE KIT....................................................... 31.95 BL546KC............... BLADE KIT W/CRYOGENIC TEMPERING..... 35.45 GN546.................... #546 GUARD-slotted and predrilled to fit........... 9.95 SHE19.................... SHEATH #19.................................................... 15.95 IDAHO TROUT FILLET Example shown uses a stabilized wood handle material. Sheath has been finished with neatsfoot oil. 11-1/2” over all length, 6-1/2” blade, 1/2” wide and 1/16” thick. This knife has a blade of superior 8-A stainless steel and is hollow ground. Has good tang shape with three holes for pins of 1/8” diameter. FITS SHEATH #1. Handle material not included. CAT. NO. ITEM PRICE BL070.................... BLADE ONLY................................................... $9.95 BL070C.................. BLADE W/DEEP CRYOGENIC....................... 13.45 TEMPERING (-305 o F) This sheath fits blades BL070 and BLSFS7 or blade length of 6-1/2” to 7”. CAT. NO. ITEM PRICE SHE1............................. SHEATH #1............................................. $15.95 SALMON FILLET 10-1/4” overall length, 5-1/2” blade, 1” wide at ricasso and 1/16” thick. Flat ground and mirror polish makes this blade just perfect. Extra flexible 8-A stainless steel blade is truly the trout fisherman’s dream. Nice tang with three holes for 1/8” diameter pins. FITS SHEATH # 17. Handle material not included. CAT. NO. ITEM PRICE BL060.................... BLADE ONLY................................................. $11.50 BL060C.................. BLADE W/DEEP CRYOGENIC....................... 15.00 TEMPERING (-305 o F) EAST BAY FILLET Carbon Damascus full tang fillet. The blade has an overall length of 11-1/2” with a 6-1/2” blade length, 5/8” width and 1/8” thickness. The blade is made of 1075/15N20 in a twist pattern. Pin holes are 5/32”. Use SHEATH #1. CAT. NO. ITEM PRICE BLS-28...........................BLADE ONLY ....................................... $125.50 STEELHEAD FILLET 12-1/4” overall length, 7” blade, 3/32” thick, 440C stainless steel. Flat ground and satin finished. Good looking and functional upswept tip with a neat pistol grip handle with very good tip flexibility. All eight holes take 3/32” diameter pins. The forward holes are for a bolster if you want. FITS SHEATH #12. CAT. NO. ITEM PRICE BL447.................... BLADE ONLY................................................. $17.95 BL447C.................. BLADE W/DEEP CRYOGENIC....................... 21.45 TEMPERING (-305 o F) 56 Carbon Damascus full tang fillet. The blade has an overall length of 9-1/2” with a 5” blade length, 5/8” width and 1/8” thickness. The blade is made of 1075/15N20 in a twist pattern. Pin holes are 5/32”. Sheath not available at this time. Cat. No. Item Price BLS-11........................... BLADE ONLY........................................ $ 89.95 <strong>Texas</strong> knifemaker’s supply order on-line www.texasknife.com fax (713) 461-8221
STAINLESS STEEL FILLET & DIVE BLADES FLEXIBLE FILLET BLADE INFORMATION FOR FINISHING A SHEATH Made of 440C stainless steel, 11-7/8” overall length, 7” long blade, satin finished and hollow ground, 1/16” thick. Three 5/32” diameter holes for your favorite pin stock. FITS SHEATH #1. CAT. NO. ITEM PRICE BLSFS7C ...............BLADE W/DEEP..............................................18.95 CRYOGENIC TEMPERING (-305 o F) TEXAS FILLET Cryogenicically treated high carbon stainless steel blade. 16” overall lenghth,1/16” thick with 10-1/2” cutting edge. Use (3) 1/8” pins. Satin finished and hollow ground. Sure to help out with those bigger than average fish. Uses an extra long SHEATH, #SHE-TEX. CAT. NO. ITEM PRICE BL707C ..................BLADE W/DEEP ........................................... $18.45 CRYOGENIC TEMPERING (-305 o F) SHE-TEX................SHEATH FOR TEXAS FILLET........................ 17.95 STINGRAY FILLET The length of this double edge fillet is 12-1/2" overall. The blade is a long 7" and 5/8" wide. The pinhole diameter is 5/32". CAT. NO. ITEM PRICE BL050 ....................BLADE ONLY.................................................. $9.95 BL050C.................. BLADE W/DEEP.............................................. 13.45 CRYOGENIC TEMPERING (-305 o F) MODEL A OCEAN EDGE DIVE SERIES 9-1/4” overall length, 3/16” thick, 440C stainless steel with a satin finish. This blade is cryo treated and double tempered, and dive ready! CAT. NO. ITEM PRICE BLMODAC..............BLADE CRYO-TREATED(-305 o F)................. $13.95 & DOUBLE TEMPERED MODEL B 9-3/4” overall length, 3/16” thick, 440C stainless steel with a satin finish. This blade is cryo treated and double tempered, and dive ready! CAT. NO. ITEM PRICE BLMODBC..............BLADE CRYO-TREATED(-305 o F)................. $13.95 & DOUBLE TEMPERED Our sheaths are constructed from vegetable oil tanned leather and are ready to be shaped to your knife. The following steps will help you form this sheath. The sheath is very thirsty, so do not wet until necessary. Items to assemble ahead of time: hairdryer, plastic wrap or floor wax if knife is carbon steel, leather dye, if desired, neatsfoot oil and wool swabs for applying the oil. Compare the sheath to your knife and be sure they can be fitted together. Handle end should extend from top of sheath (pouch type) about 1-1/4” on smaller knives and 1-1/2” to 2” on larger knives. Hands must be clean. Hold the sheath under a cold water faucet and allow water to flow over and inside the entire sheath. This takes about one minute. Pour out excess water. Push knife into the sheath as far as possible without cutting through the bottom of the sheath. Do not force knife tip through the end of sheath, and do not hold tip of sheath or force against any part of your body, because one could cut through the leather and cut oneself. Knife should now be very tight in the wet sheath. If the blade is carbon steel, then it should be protected with plastic wrap or floor wax (not buffed off) to prevent oxidation (rust) due to water exposure. Now that the knife is securely inside the sheath, begin to form the sheath to fit the knife by rubbing with your fingers around the blade portion, guard and/or finger groves. Form around any shape that can be used to hold knife inside the sheath. The idea is to mold the leather to fit very tightly around the knife so that it will not fall out of the sheath when it is being worn on the belt. It is helpful if another person can hold a hair dryer about one foot away from the sheath while it is being shaped. Mold the sheath until the natural color begins to return and some stiffening of the leather begins. Remove the knife from the sheath and store safely. Again mold the same area as before, and go over the areas disturbed when you removed the knife from the sheath. Be sure to keep the sewn edge straight and open the belt loop slightly. When sheath looks like it is formed as you wish, then hang it in an area so that it will not be disturbed until completely dry and hard. A few hours in the sun or even hanging from an air vent over night should allow it to dry completely. Sheath will now be stiff and ready to dye with leather dye, or simply to color and oil with neatsfoot oil. Apply four heavy coats of neatsfoot oil with a wool swab or cotton ball. These four coats may be applied at one time. Again, allow sheath to dry at least 6 hours. If color is too light, just add more neatsfoot oil to darken. If waterproof seal is desired, then add a heavy coat of mink oil or snow seal. The knife should be carried, but not stored inside the sheath. <strong>Texas</strong> knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 57
Page 2 and 3:
PRODUCT LIST Texas Knifemaker’s S
Page 4 and 5:
KNIFEMAKING STEEL STEEL BARSTOCK &
Page 6 and 7:
KNIFEMAKING STEEL Chad Nichols Carb
Page 8 and 9: HEAT TREAT OVENS & SUPPLIES DIGITAL
Page 10 and 11: MOSAIC PIN MATERIALS MOSAIC PINS BY
Page 12 and 13: GUARDS TWO BRANCH GUARDS TEAR DROP
Page 14 and 15: SPACER MATERIALS HIGH TECH PLASTIC
Page 16 and 17: SYNTHETIC HANDLE MATERIALS LAMINATE
Page 18 and 19: SYNTHETIC HANDLE MATERIALS POLYESTE
Page 20 and 21: WOOD HANDLE MATERIALS NATURAL WOOD
Page 22 and 23: ORGANIC HANDLE MATERIALS WATER BUFF
Page 24 and 25: ORGANIC HANDLE MATERIALS IMPALA JIG
Page 26 and 27: MISCELLANEOUS ITEMS 44/40 INSTANT G
Page 28 and 29: MISCELLANEOUS ITEMS TUF-GUIDE PEN S
Page 30 and 31: MISCELLANEOUS ITEMS KNIFEMAKER VISE
Page 32 and 33: SHARPENING EQUIPMENT hONING OIL AND
Page 34 and 35: BELT SANDERS This belt sander is hi
Page 36 and 37: BELTS MICRON FILM BELTS These Micro
Page 38 and 39: 36 ABRASIVES, BUFFING AND POLISHING
Page 40 and 41: ADHESIVES EPOXY EPOX5SM EPOX5LG EPO
Page 42 and 43: BOOKS 40 MY WAY A Toolmaker’s Met
Page 44 and 45: VIDEOS and DVDS BASIC DAMASCUS with
Page 46 and 47: SHEATHS LEATHER KNIFE SHEATHS These
Page 48 and 49: SHEATH MAKING SUPPLIES SPACE MARKER
Page 50 and 51: KNIFE CASES AND POUCHES KNIFE CASES
Page 52 and 53: FOLDER KITS The new DDR2 TM Modern
Page 54 and 55: FOLDER KITS 3-1/2” LOCKBACK HEAVY
Page 56 and 57: FOLDER HARDWARE & SUPPLIES BUTTON H
Page 60 and 61: STAINLESS STEEL BLADES & KNIFE KITS
Page 62 and 63: STAINLESS STEEL BLADES WOODY’S FA
Page 64 and 65: STAINLESS STEEL BLADES GENTLEMAN’
Page 66 and 67: STAINLESS STEEL BLADES CC4 TM Cowbo
Page 68 and 69: STAINLESS STEEL BLADES BOOT BLADE P
Page 70 and 71: BOWIE BLADES ALASKA BOWIE RIO GRAND
Page 72 and 73: CARBON DAMASCUS BLADES CARBON DAMAS
Page 74 and 75: STAINLESS STEEL BLADES Camp & Kitch
Page 76 and 77: 440 STAINLESS STEEL BLADES Camp & K
Page 78 and 79: CARBON STEEL KNIFE BLADES Camp & Ki
Page 80 and 81: STICK & CANE MAKING SUPPLIES WATER
Page 82 and 83: Order Form Date:___________________
show all

product list - Texas Knifemaker's Supply

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?