product list - Texas Knifemaker's Supply
product list - Texas Knifemaker's Supply
product list - Texas Knifemaker's Supply
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CARBON STEEL AND LAMINATED KNIFE BLADES, ETC.<br />
SOLIGEN CARBON STEEL KNIFE BLADES<br />
LAMINATED STEEL BLADES<br />
The following knife blades are all high carbon German made hunting<br />
knife types that we are sure you will enjoy finishing. They are also<br />
hidden tang type, which allows more individual latitude in fashioning<br />
the guard, handle and pommel. Gives it your personal touch.<br />
BL601<br />
BL600<br />
SUPREME SKINNER<br />
9-1/2” overall length, 5” long blade, 5/32” thick thumb grooves, 1-1/4” wide,<br />
hollow ground, and nicely upswept. Usually they come threaded 10/24 for<br />
tang nut #1. FITS SHEATH #5<br />
CAT. NO. ITEM PRICE<br />
BL170 ....................BLADE ONLY............................................... $29.95<br />
LARGE DEEP BELLY SKINNER<br />
9-1/4” overall length, 5-1/4” long blade, 5/32” thick, 1-1/4” wide, nice clip<br />
point on an old time shape for those big skinning jobs. False edge at top<br />
and flat ground satin finish set this off as a good-looking skinner blade.<br />
CAT. NO. ITEM PRICE<br />
BL147.....................BLADE ONLY................................................ $29.95<br />
SMALL DEEP BELLY SKINNER<br />
BL600 and BL601 are composed of 3 laminations of steel. The center<br />
is razor blade hard and the outer laminations are softer and protective of<br />
the edge bearing center. This ingenious design works to give the blade<br />
a lasting edge with increased flexibility. The center lamination registers a<br />
59 on the Rockwell “C” scale and therefore stays sharp for a long, long<br />
time. It also extends through the entire blade so the edge won’t wear off<br />
with repeated sharpening. These blades have a correctly curved section<br />
for skinning and a straight section for slicing.<br />
BL111is not laminated for a reason. A blade of this size (2-11/16” long)<br />
needs to be thin to be useful. Laminating a blade this small would make it<br />
too thick. What you have in the BL111, or what is called“The Runt”, is the<br />
smallest blade of their line. It is razor blade hard and compact making it a<br />
good choice for patch knives for muzzleloaders, trout knives for fisherman,<br />
boot knives, small game knives, or wood carvers.<br />
CAT. NO. ITEM PRICE<br />
BL600....................... NORSEMAN 3-1/4” long blade.................... $19.95<br />
BL601....................... VIKING 3-3/4” long blade............................. 21.95<br />
BL111........................ THE RUNT 2-11/16” long blade..................... 16.95<br />
LAMINATED CARBON STEEL BLADES<br />
BL111<br />
BL607<br />
BL608<br />
8-1/2” overall length, 4-1/2” long blade, 1/8” thick, 1” wide, flat ground<br />
and satin finished blade. Same as BL147 above, but smaller. Tang nut<br />
#1. FITS SHEATH #7.<br />
CAT. NO. ITEM PRICE<br />
BL146 ....................BLADE ONLY................................................$24.95<br />
DROP POINT UTILITY BLADE<br />
The “Little Swede” and the “Big Swede” are laminated carbon steel baldes<br />
from Sweden. The blade is a three part laminate with a core of high carbon<br />
steel protected by sides of lower carbon outer steel. The core of these<br />
laminated blades is very hard (61-62) Rockwell C. The “Big Swede” has<br />
a blade length of 4-1/4” and is 7/8” wide and 0.100” thick and has a 4-1/4”<br />
long hidden tang. The “Little Swede” has a blade length of 3-3/4” and is<br />
5/8” wide and 0.105” thick and has a 3-7/8” long hidden tang..<br />
CAT. NO. ITEM PRICE<br />
BL607....................... BIG SWEDE 4-1/4” long blade.................... $22.95<br />
BL608....................... LITTLE SWEDE 3-3/4” long blade................ 17.95<br />
CAST IRON SPEAR POINT<br />
8-1/4” overall length, 5” long blade, 5/32” thick, 1-1/8” wide, flat ground<br />
and satin finished. Tang is threaded 10/24 for tang nut #1. FITS<br />
SHEATH #8.<br />
CAT. NO. ITEM PRICE<br />
BL132.....................BLADE ONLY............................................... $24.95<br />
13-1/2” overall length and 2-1/2” maximum width. Tang is 3/16” thick and<br />
15/16” wide, 3-1/2” long with two indentations for holes to be drilled out.<br />
Cast iron with four ribs and very tough. Weighs 1 lb. 6 oz. Maximum thickness<br />
through ribs is 7/16”.<br />
CAT. NO. ITEM PRICE<br />
BLSP1....................BLADE...........................................................$29.95<br />
<strong>Texas</strong> knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 77