product list - Texas Knifemaker's Supply

Heat Treat and Cryo
Date____________
10649 Haddington, #180 cUST. I.D. nO. (if known)____________
Houston, TX 77043
return after heat treatment to:
FOR OFFICE USE ONLY
Please Circle:
paid
pickup
ship
DAYTIME PHONE (MUST BE INCLUDED):
Method of Payment:
Check or Money Order
VISA
AMERICAN
EXPRESS
DISCOVER
CARD
MASTERCARD
C.O.D.
USA only
*
Month / Year
ExpirationDate
Credit Card Number
3 Digits on Back of Card
or 4 Digits on Front of Card if Am. Ex.
approval signature:______________________________________
please read the following:
1. Blades must have a name or logo permanently stamped or etched on blade or tang. If there is not name or logo, please include
an outline of your blades on the back of this form or a separate piece of paper to help us keep up with your blades.
2. Please do not use duct tape on blades or packaging. Maximum overall length is 20 inches.
3. Please do not attach anything to blade that will melt below 2500 F.
4. Blades must be clean. Please protect points from damage during shipping to TKS.
5. All blades must be in our office by 5:00 p.m. on Monday to be entered for heat treatment Tuesday morning. We make every effort
to ship the blades that have been heat-treated the following Tuesday.
6. Our guarantee is that every possible effort will be made to give each blade the best combination of hardness and toughness
through the proper use of equipment. However, if a blade is damaged due to our handling or equipment malfunction, our liability
is limited to the replacement of an equal amount of the same steel used in the damaged item. Any further responsi- bility will not
be accepted nor will we be responsible for warpage due to unequal grinding or grinding the blade too thin. We also reserve the
right to refuse any blade that could have serious heat treating or warpage problems we could not correct.
heat treating and tempering cost:
List quantities of each type of steel in the space provided.(Air Quench Only)
440C___ ,440V___,154CM___, ATS34___, A-2___, D-2___ QUANTITY PRICE
Overall lengths less than 10 inches...1 to 7 blades @ $5.50 each................................ $
Overall lengths less than 10 inches...8 or more blades @ $4.95 each.........................
Overall lengths of 10 to 20 inches...All blades @ $10.00 each.....................................
440C___ ,440V___,154CM___, ATS34___, A-2___, D-2___
All springs, rockers, and spring holders for folding knives @ $4.00 each..................
Cruwear___, Vascowear___, BG42___, CPM10V___, and other exotic steels
All blades of this material will cost $15.00 for each blade........................................
extra tempering sequence:
Double draw (temper) of steel other than D-2, A-2, 440 V or triple draw for Cruwear and
Vascowear at customer’s request for hardening to different hardness than we normally
attain will be an extra charge of $4.00 per item or blade..............................................._________ _________
sub-zero quench: (-305 degrees F) @ $4.00 each...................................................... _________ _________
UPS (2 lbs. or less) Includes ins. of $100.00.
*UPS Add’l insurance (over $100 value)
U.S.P.S. Priority (2 lbs or less).
SHIPPING CHARGES
$ 7.95 minimum
$ 0.50 per $100 extra
$ 7.95 minimum
*U.S.P.S. Add’l insurance $100.00 = $2.30
$200.00 = $3.35
$300.00 = $4.40
Total for Merchandise & Services
Total Shipping Charges
*Additional Insurance Charges
TX Residents add 8.25% Sales Tax
TOTAL AMOUNT
return of this form completed will
expEDIte the return of your blades
important! Value of blade(s) $__________________
So your blades can be insured properly.
Texas knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 79