product list - Texas Knifemaker's Supply

More documents

Recommendations

Info

CARBON STEEL KNIFE BLADES Camp & Kitchen This line of blades is suitable for kitchen and buck skinners. All patterns are old, proven classics that date back to the time when a family purchased one or two knives and then used them for everything. The knife collectors will recognize the Russell trademark, which has been used since 1834. These blades are of high quality carbon steel, flat ground for ease in sharpening and cutting. No frills and nothing wasted on cosmetics, just good usin’ knives. PARING BLADE CAMP KNIFE BLADE 5” long blade, 9” overall, .094” thick, 1-1/8” wide, very sturdy, three 5/32” diameter holes. CAT.NO. PRICE BLCAM......................................................................................... $12.95 RUSSELL GREEN RIVER BLADE Paring knife, spear point, 3-1/4” blade, 7-1/4” overall, .057” thick, with three 5/32” diameter holes for pins or rivets. CAT.NO. PRICE BL033...............................................................................................$8.95 PACIFIC PATCH PARING BLADE 4-7/8” long blade, 9” overall, .088” thick, 1” wide, spear point, also known as Danby’s knife, three 5/32” diameter holes for pins and rivets. CAT.NO. PRICE BLRGR..........................................................................................$12.95 SHEEP SKINNER BLADE 3-1/2” long blade, 6-3/4” overall, .074” thick and three 5/32” diameter holes. CAT.NO. PRICE BL035...............................................................................................$8.95 RIPPER BLADE 4” long blade, 8-3/4” overall, .075” thick, 3/4” wide spear point with three 5/32” diameter holes. CAT.NO. PRICE BL040...............................................................................................$8.95 SHEATH KNIFE BLADE 9-5/8” overall length , .133” thick, 1-1/4” wide, 5-1/4” long blade curved upward for maximum skinning, three 5/32” diameter holes for pins and rivets. This is an excellent skinning blade. CAT.NO. PRICE BLSSK........................................................................................... $12.95 BONING BLADE 6” long blade,10-1/2” overall, .115” thick, 1” wide, very sturdy with three 5/32” diameter holes for pins and rivets. CAT.NO. PRICE BLBON......................................................................................... $ 12.95 BUTCHER BLADE 4-1/2” long blade, 8-1/2” overall, .085” thick, 1-1/4” wide and three 5/32” diameter holes. CAT.NO. PRICE BL045.............................................................................................$12.95 BUFFALO SKINNER 7” long blade, 11-1/2” overall, .093” thick, 1-1/4” wide, a good size butcher knife blade. CAT.NO. PRICE BLBUT........................................................................................... $14.95 TEXAS BUTCHER BLADE 5” long blade, 9” overall, .138” thick, 1-1/4” wide, three 5/32” diameter 15-1/8” overall carbon steel blade. Blade is 10” long, .108” thick with a holes for pins and rivets. This one is the real skinner blade. maximum width of 1-5/8”. CAT.NO. PRICE CAT.NO. PRICE BLBUF........................................................................................... $12.95 BLBUTEX...................................................................................... $19.95 76 <strong>Texas</strong> knifemaker’s supply order on-line www.texasknife.com fax (713) 461-8221
CARBON STEEL AND LAMINATED KNIFE BLADES, ETC. SOLIGEN CARBON STEEL KNIFE BLADES LAMINATED STEEL BLADES The following knife blades are all high carbon German made hunting knife types that we are sure you will enjoy finishing. They are also hidden tang type, which allows more individual latitude in fashioning the guard, handle and pommel. Gives it your personal touch. BL601 BL600 SUPREME SKINNER 9-1/2” overall length, 5” long blade, 5/32” thick thumb grooves, 1-1/4” wide, hollow ground, and nicely upswept. Usually they come threaded 10/24 for tang nut #1. FITS SHEATH #5 CAT. NO. ITEM PRICE BL170 ....................BLADE ONLY............................................... $29.95 LARGE DEEP BELLY SKINNER 9-1/4” overall length, 5-1/4” long blade, 5/32” thick, 1-1/4” wide, nice clip point on an old time shape for those big skinning jobs. False edge at top and flat ground satin finish set this off as a good-looking skinner blade. CAT. NO. ITEM PRICE BL147.....................BLADE ONLY................................................ $29.95 SMALL DEEP BELLY SKINNER BL600 and BL601 are composed of 3 laminations of steel. The center is razor blade hard and the outer laminations are softer and protective of the edge bearing center. This ingenious design works to give the blade a lasting edge with increased flexibility. The center lamination registers a 59 on the Rockwell “C” scale and therefore stays sharp for a long, long time. It also extends through the entire blade so the edge won’t wear off with repeated sharpening. These blades have a correctly curved section for skinning and a straight section for slicing. BL111is not laminated for a reason. A blade of this size (2-11/16” long) needs to be thin to be useful. Laminating a blade this small would make it too thick. What you have in the BL111, or what is called“The Runt”, is the smallest blade of their line. It is razor blade hard and compact making it a good choice for patch knives for muzzleloaders, trout knives for fisherman, boot knives, small game knives, or wood carvers. CAT. NO. ITEM PRICE BL600....................... NORSEMAN 3-1/4” long blade.................... $19.95 BL601....................... VIKING 3-3/4” long blade............................. 21.95 BL111........................ THE RUNT 2-11/16” long blade..................... 16.95 LAMINATED CARBON STEEL BLADES BL111 BL607 BL608 8-1/2” overall length, 4-1/2” long blade, 1/8” thick, 1” wide, flat ground and satin finished blade. Same as BL147 above, but smaller. Tang nut #1. FITS SHEATH #7. CAT. NO. ITEM PRICE BL146 ....................BLADE ONLY................................................$24.95 DROP POINT UTILITY BLADE The “Little Swede” and the “Big Swede” are laminated carbon steel baldes from Sweden. The blade is a three part laminate with a core of high carbon steel protected by sides of lower carbon outer steel. The core of these laminated blades is very hard (61-62) Rockwell C. The “Big Swede” has a blade length of 4-1/4” and is 7/8” wide and 0.100” thick and has a 4-1/4” long hidden tang. The “Little Swede” has a blade length of 3-3/4” and is 5/8” wide and 0.105” thick and has a 3-7/8” long hidden tang.. CAT. NO. ITEM PRICE BL607....................... BIG SWEDE 4-1/4” long blade.................... $22.95 BL608....................... LITTLE SWEDE 3-3/4” long blade................ 17.95 CAST IRON SPEAR POINT 8-1/4” overall length, 5” long blade, 5/32” thick, 1-1/8” wide, flat ground and satin finished. Tang is threaded 10/24 for tang nut #1. FITS SHEATH #8. CAT. NO. ITEM PRICE BL132.....................BLADE ONLY............................................... $24.95 13-1/2” overall length and 2-1/2” maximum width. Tang is 3/16” thick and 15/16” wide, 3-1/2” long with two indentations for holes to be drilled out. Cast iron with four ribs and very tough. Weighs 1 lb. 6 oz. Maximum thickness through ribs is 7/16”. CAT. NO. ITEM PRICE BLSP1....................BLADE...........................................................$29.95 <strong>Texas</strong> knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 77
Page 2 and 3:
PRODUCT LIST Texas Knifemaker’s S
Page 4 and 5:
KNIFEMAKING STEEL STEEL BARSTOCK &
Page 6 and 7:
KNIFEMAKING STEEL Chad Nichols Carb
Page 8 and 9:
HEAT TREAT OVENS & SUPPLIES DIGITAL
Page 10 and 11:
MOSAIC PIN MATERIALS MOSAIC PINS BY
Page 12 and 13:
GUARDS TWO BRANCH GUARDS TEAR DROP
Page 14 and 15:
SPACER MATERIALS HIGH TECH PLASTIC
Page 16 and 17:
SYNTHETIC HANDLE MATERIALS LAMINATE
Page 18 and 19:
SYNTHETIC HANDLE MATERIALS POLYESTE
Page 20 and 21:
WOOD HANDLE MATERIALS NATURAL WOOD
Page 22 and 23:
ORGANIC HANDLE MATERIALS WATER BUFF
Page 24 and 25:
ORGANIC HANDLE MATERIALS IMPALA JIG
Page 26 and 27:
MISCELLANEOUS ITEMS 44/40 INSTANT G
Page 28 and 29: MISCELLANEOUS ITEMS TUF-GUIDE PEN S
Page 30 and 31: MISCELLANEOUS ITEMS KNIFEMAKER VISE
Page 32 and 33: SHARPENING EQUIPMENT hONING OIL AND
Page 34 and 35: BELT SANDERS This belt sander is hi
Page 36 and 37: BELTS MICRON FILM BELTS These Micro
Page 38 and 39: 36 ABRASIVES, BUFFING AND POLISHING
Page 40 and 41: ADHESIVES EPOXY EPOX5SM EPOX5LG EPO
Page 42 and 43: BOOKS 40 MY WAY A Toolmaker’s Met
Page 44 and 45: VIDEOS and DVDS BASIC DAMASCUS with
Page 46 and 47: SHEATHS LEATHER KNIFE SHEATHS These
Page 48 and 49: SHEATH MAKING SUPPLIES SPACE MARKER
Page 50 and 51: KNIFE CASES AND POUCHES KNIFE CASES
Page 52 and 53: FOLDER KITS The new DDR2 TM Modern
Page 54 and 55: FOLDER KITS 3-1/2” LOCKBACK HEAVY
Page 56 and 57: FOLDER HARDWARE & SUPPLIES BUTTON H
Page 58 and 59: STAINLESS STEEL FILLET BLADES FINES
Page 60 and 61: STAINLESS STEEL BLADES & KNIFE KITS
Page 62 and 63: STAINLESS STEEL BLADES WOODY’S FA
Page 64 and 65: STAINLESS STEEL BLADES GENTLEMAN’
Page 66 and 67: STAINLESS STEEL BLADES CC4 TM Cowbo
Page 68 and 69: STAINLESS STEEL BLADES BOOT BLADE P
Page 70 and 71: BOWIE BLADES ALASKA BOWIE RIO GRAND
Page 72 and 73: CARBON DAMASCUS BLADES CARBON DAMAS
Page 74 and 75: STAINLESS STEEL BLADES Camp & Kitch
Page 76 and 77: 440 STAINLESS STEEL BLADES Camp & K
Page 80 and 81: STICK & CANE MAKING SUPPLIES WATER
Page 82 and 83: Order Form Date:___________________
show all

product list - Texas Knifemaker's Supply

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?