Owner's Manual - Universal Remote Control
Owner's Manual - Universal Remote Control
Owner's Manual - Universal Remote Control
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Programming “My Favorites” -<br />
Favorite Channel Buttons<br />
In Cable mode, the four [MY FAVORITES]<br />
buttons are also designed to serve as dedicated<br />
Favorite Channel buttons.<br />
Each button will access one of your favorite<br />
channels with just one button press. Here’s<br />
how to program Favorite Channels:<br />
STEP 1: Press the [CABLE/SAT] button to<br />
select the Cable/SAT mode.<br />
STEP 2: Press one of the [MY FAVORITES]<br />
buttons and the [MUTE] button at the same<br />
time for two seconds until the [CABLE/SAT]<br />
component LED turns on.<br />
IMPORTANT: You have 30 seconds to perform<br />
the next step while you are in programming<br />
mode. If you do not press a button within<br />
30 seconds, the component LED light will<br />
turn off. The remote will exit the programming<br />
mode and you will have to start over.<br />
MY<br />
FAVORITES<br />
MUTE<br />
Page 23