Owner's Manual - Universal Remote Control
Owner's Manual - Universal Remote Control
Owner's Manual - Universal Remote Control
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Erasing SimpleSound & Other<br />
“Punch Through” Commands<br />
STEP 1: Press and hold the Component<br />
button you want to erase volume control<br />
from, such as DVD or VCR and the SELECT<br />
[SEL] button at the same time for two seconds<br />
until the Component LED light turns on.<br />
STEP 2: Press the VOLUME UP [VOL � ]<br />
button and the same component button from<br />
Step 1. The component LED light will blink<br />
three times to confirm the erasure.<br />
VOLUME<br />
UP�<br />
Repeat Steps 1--2 to erase SimpleSound<br />
commands from other components.<br />
NOTE: To erase other “punch through” commands,<br />
simply press the following buttons in<br />
place of VOLUME UP in Step 2:<br />
• For Channel <strong>Control</strong>, press: CHANNEL<br />
UP [CH� ]<br />
• For Transport <strong>Control</strong>, press: PLAY [�]<br />
• For OSD <strong>Control</strong>, press: [MENU]<br />
Page 33<br />
SELECT<br />
COMPONENT<br />
BUTTONS