Eurotubi Pressfitting System - Technical Guide ... - Damstahl
Eurotubi Pressfitting System - Technical Guide ... - Damstahl
Eurotubi Pressfitting System - Technical Guide ... - Damstahl
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1. INTRODUCTION<br />
The <strong>Eurotubi</strong> <strong>Pressfitting</strong> <strong>System</strong> is an extremely fast and simple pressfitting assembly system, producing<br />
reliable joints with high mechanical resistance, for civil, industrial, naval and fire fighting pipework system<br />
installations.<br />
The diameters currently available range from 12 to 108 mm, depending on the material used. The three<br />
greater diameters of 76.1, 88.9 and 108 mm are commonly called “big size”.<br />
The design and commissioning of these distribution networks require a vast knowledge of technical notions<br />
and local regulations and legislation, potentially varying from country to country. This <strong>Technical</strong> <strong>Guide</strong><br />
provides basic information to:<br />
- assess the fields of application with due skill;<br />
- design the systems according to the latest technological criteria;<br />
- perform the installations up to standard.<br />
In any case it is the task of the designer and/or the installer to ensure that the standards contained in this<br />
<strong>Guide</strong> are compatible with the local applicable laws. Otherwise, the local applicable laws prevail and<br />
therefore it is not possible to use <strong>Eurotubi</strong> <strong>Pressfitting</strong> <strong>System</strong>.<br />
1.1 Materials<br />
Depending on the application, the following materials are used:<br />
- stainless steel;<br />
- carbon steel;<br />
- cupronickel.<br />
1.2 Benefits<br />
The main benefits of the <strong>Eurotubi</strong> <strong>Pressfitting</strong> <strong>System</strong> are:<br />
- alternative practice to traditional joining methods that require welding and/or threading;<br />
- overall system cost saving;<br />
- fast and easy assembly;<br />
- clean and safe system, with no risk for the installer;<br />
- reliable, secure and long-lasting seals;<br />
- minimal possibility of errors by operators;<br />
- no use of heat sources;<br />
- no fire risk during installation;<br />
- high corrosion resistance;<br />
- high thermal resistance;<br />
- weight significantly reduced compared to traditional metal systems;<br />
- high visual appeal, ideal for visible installations;<br />
- exceptional fluid flowing properties;<br />
- the end quality depends on the equipment rather than on the skill of the operator, who does not need to be<br />
highly qualified.