REGIONAL INSTITUTE OF MEDICAL SCIENCES IMPHAL ...

More documents

Recommendations

Info

2.3 The Contractor shall make provision of hangers, sleeves, structural openings and other requirements well in advance to hold up progress of the construction schedule. 2.4 The said Contract comprises of furnishing of all materials, equipment, labour & transportation etc. necessary to render the installation fully operational as per the intent of specification and drawings, including any necessary adjustment or corrections. The installation shall be all in conformity with local laws covering such installation. 3.0 Contract Drawings 3.1 The drawings issued with the Bid are diagrammatic only and indicate the extent and general arrangement of the installation. Drawings shall not be scaled. 3.2 The Contractor shall follow the Bid drawings for preparation of his detailed sanitary, plumbing & fire fighting & Shop drawings and for subsequent installation work. He shall check the drawings of other services to verify spaces in which his work will be installed. The Contractor shall examine all Architectural, Structural, Plumbing and other services drawings before starting the work and report to the Engineer any discrepancies and obtain clarification. Any changes found essential to coordinate installation of this work with other services, shall be made with prior approval of the Engineer. 4.0 Shop Drawings 4.1 With in two weeks after Award of the Contract, the Contractor shall furnish for approval of the Engineer, three sets of detailed sanitary, plumbing, fire fighting (external & internal), Pump room & Shop drawings of all equipment and materials required to complete the work as per specifications. These drawings shall contain details of construction, size, arrangement, operating clearances, performance characteristics, and capacity of all items of equipment, as also the details of all related items of work of other trades. All shop drawings to be made in accordance with latest fire safety norms & to be got approved by the authorities before it is finally approved by Engineer before start of work. 4.2 All drawings necessary for assembly, erection, maintenance, repair and operation of the equipment shall be furnished and different parts shall be suitably numbered for identification and ordering of spare parts. 4.3 When the Engineer makes any amendments in the above drawings, the Contractor shall supply fresh sets of drawings with the amendments duly incorporated, along with the drawings on which corrections were indicated. HSCC/RIMS/2010/01 P I SCC-40
4.4 No material or equipment may be delivered or installed at the job Site until the Contractor has in his possession, the approved Shop drawings for that particular material or equipment. 4.5 After approval of the drawings by the Engineer, the Contractor shall further furnish six sets of Shop drawings for the exclusive use of and retention by the Engineer. 4.6 Approval of drawings by the Engineer shall not relieve the Contractor of any part of his obligation to meet all the requirements of the Contract or of the correctness of his drawings. The Engineer's approval of specific item shall not mean the approval of the assembly of which it is a component. The Contractor shall be responsible for and is to bear the cost for all alternations of the works due to discrepancies or omission in the drawings or other particulars supplied by him, whether such drawings have been approved by the Engineer or not. 4.7 Where the work of the Contractor has to be installed in close proximity to, or will interfere with the work of other trades, the Contractor shall assist in working out the space conditions to make a satisfactory adjustment. If so directed by the Engineer, the Contractor shall prepare composite working drawings and sections to a suitable scale not less than 1:50, clearly showing how his work is to be installed in relation to the work of other trades. If the Contractor installs his work before coordinating with other trades, or so as to cause any interference with the work of other trades, he shall make all the necessary changes without extra cost. 4.8 All shop drawings and detailed drawings shall be made as per the requirements of the Local Authorities and tender drawings incorporating all the latest regulations and requirements. No separate drawings shall be issued for making the shop drawings. 5.0 Samples and Catalogues 5.1 Prior to ordering any equipment/ material/ system, the Contractor shall submit to the Engineer, the catalogues, along with samples from approved list of manufacturers. No material shall be procured prior to the approval by the Engineer. 5.2 Approval of Materials All materials used on the Works shall be new and of the best quality available, conforming to the relevant specifications and as per good Engineering practice. Prior approval shall be obtained in writing from the HSCC/RIMS/2010/01 P I SCC-41
Page 1 and 2:
Package No Ministry of Health & Fam
Page 3 and 4:
Package No. Regional Institute of M
Page 5 and 6:
Regional Institute of Medical Scien
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
INDEX GENERAL CONDITIONS OF CONTRAC
Page 23 and 24:
-----------------------------------
Page 25 and 26:
-----------------------------------
Page 27 and 28:
-----------------------------------
Page 29 and 30:
1.1 Definitions GENERAL CONDITIONS
Page 31 and 32:
otherwise agreed by the Engineer an
Page 33 and 34:
(a) The Engineer's Representative s
Page 35 and 36:
(b) the purchase of materials which
Page 37 and 38:
7.1 Supplementary Drawings and Inst
Page 39 and 40:
10.3 Costs of Securities The cost o
Page 41 and 42:
14.2 Revised Programme HSCC/RIMS/20
Page 43 and 44:
accuracy thereof and the Contractor
Page 45 and 46:
(iv) pressure waves caused by aircr
Page 47 and 48:
(b) loss or damage to any property
Page 49 and 50:
when required, produce to the Consu
Page 51 and 52:
shall immediately be reported by th
Page 53 and 54:
or ancillary to the Works. 31.2 Fac
Page 55 and 56:
state or the Central Government or
Page 57 and 58:
investigations or enquiry under thi
Page 59 and 60:
36.5 Engineer's Determination Where
Page 61 and 62:
(c) The removal and proper re-execu
Page 63 and 64:
COMMENCEMENT AND DELAYS 41.1 Commen
Page 65 and 66:
the Contractor has (a) (b) within 2
Page 67 and 68:
therein. The Contractor shall be en
Page 69 and 70:
Contract. If, in the opinion of the
Page 71 and 72:
provisional rates or prices to enab
Page 73 and 74:
Notwithstanding any other provision
Page 75 and 76:
54.5 Conditions of Hire Contractor'
Page 77 and 78:
used, in whole or in part, or not a
Page 79 and 80:
such is made in a special item prov
Page 81 and 82:
the receipt of the monthly statemen
Page 83 and 84:
progressively reduced by the amount
Page 85 and 86:
60.13 Final Certificate Within 28 d
Page 87 and 88:
materials which have been deemed to
Page 89 and 90:
with the Contract for any Permanent
Page 91 and 92:
RELEASE FROM PERFORMANCE 66.1 Payme
Page 93 and 94:
of a notice from the Arbitrator, fa
Page 95 and 96:
which payment is to be made, subjec
Page 97 and 98:
ANNEXURE - A PROFORMA OF INDENTURE
Page 99 and 100: 8. That the Contractor hereby charg
Page 101 and 102: INDEX INSTRUCTION TO BIDDERS ------
Page 103 and 104: SPECIFIC CONDITIONS OF CONTRACT ---
Page 105 and 106: -----------------------------------
Page 107 and 108: -----------------------------------
Page 109 and 110: (C) SPECIFIC CONDITIONS OF CONTRACT
Page 111 and 112: INSTRUCTIONS TO BIDDERS A. General
Page 113 and 114: 4.1 The Bidder is advised to acquai
Page 115 and 116: C. Preparation of Bids 8.0 Language
Page 117 and 118: ) In the case of successful Bidder,
Page 119 and 120: 15.3 All the above three envelopes
Page 121 and 122: 19.4 The Bidder's names, general te
Page 123 and 124: unsolicited benefits to the Employe
Page 125 and 126: SPECIFIC CONDITIONS OF CONTRACT The
Page 127 and 128: e) The responsibility for making th
Page 129 and 130: 36.1.4 Arms and Ammunition The Cont
Page 131 and 132: 36.1.14 The wage record and wage sl
Page 133 and 134: The increase/decrease in prices sha
Page 135 and 136: 37.0 Taxation The Contractor shall
Page 137 and 138: conveyance to Site as no workers/ s
Page 139 and 140: 39.2.9 Approval of Samples prior to
Page 141 and 142: 39.7 Metric Units The Contractor sh
Page 143 and 144: 39.8.1.4 The laboratory shall be co
Page 145 and 146: the contractor to avoid any interru
Page 147 and 148: Actual measurement of secured advan
Page 149: ADDITIONAL SPECIFIC CONDITIONS OF C
Page 153 and 154: 8.0 Technical Data 8.1 Deleted 9.0
Page 155 and 156: for human safety. Complete sets of
Page 157 and 158: 22.0 Control System During the main
Page 159 and 160: B) RELATING TO ELECTRICAL INSTALLAT
Page 161 and 162: sets of working electrical drawings
Page 163 and 164: 18.0 Inspection, Testing and Inspec
Page 165 and 166: c. Location and rating of sockets a
Page 167 and 168: 26.0 Completion Certificate 26.1 On
Page 169 and 170: (C) SPECIFIC CONDITIONS OF CONTRACT
Page 171 and 172: d. Schematic control drawings givin
Page 173 and 174: 11.0 Samples and Prototypes The Con
Page 175 and 176: to use the plant to Air condition s
Page 177 and 178: 24. Handing over & Taking over proc
Page 179 and 180: provisions of the Contract at the t
Page 181 and 182: the extent of loss, damage, cost, c
Page 183 and 184: ANNEXURE - C PROFORMA FOR BID SECUR
Page 185 and 186: ANNEXURE - D APPENDIX TO TENDER Imp
Page 187 and 188: damage, costs, charges and expenses
Page 189 and 190: ANNEXURE - F To PROFORMA FOR ADVANC
Page 191: Security which the Employer may hav
show all

REGIONAL INSTITUTE OF MEDICAL SCIENCES IMPHAL ...

Create successful ePaper yourself

Delete template?

Save as template?