GV-DSP LPR - Surveillance System, Security Cameras, and CCTV ...

More documents

Recommendations

Info

2Getting Started1. Open your web browser, and type the default IP address http://192.168.0.230/2. In both Login and Password fields, type the default value admin. Click Apply.3. In the left menu, select Network and then LAN to begin the network settings.Figure 2-24. Select Static IP address. Type IP Address, Subnet Mask, Router/Gateway, PrimaryDNS and Secondary DNS in the Configure connection parameters section.5. Click Apply. The GV-DSP LPR is accessible by entering the assigned IP address onthe web browser.Important:• Dynamic IP Address, PPPoE and UMTS should only be enabled if you knowwhich IP address the GV-DSP LPR will get from the DHCP server or ISP.Otherwise you must use the Dynamic DNS service to obtain a domain namelinked to the GV-DSP LPR’s changing IP address first.For details on Dynamic IP Address and PPPoE settings, see 4.4.3 AdvancedTCP/IP.• If Dynamic IP Address, PPPoE or UMTS is enabled and you cannot access theunit, you may have to reset it to the factory default and then perform the networksettings again.To restore the factory settings, see the Default button in 1.4.1 Front View.9
2.3 Configuration BasicsOnce the camera is properly installed, these important features can be configured using thebrowser-based configuration page and are discussed in the following sections in thismanual:• Date and time adjustment: see 4.5.1 Date & Time Setting.• Login and privileged passwords: see 4.5.3 User Account.• Network gateway: see 4.4 Network.• Video attribute (Brightness, Contrast, Saturation and Hue): see 3.2.2 Adjustment ofVideo Attributes.• Video format, resolution and frame rate: see 4.1.1 Video Settings.10
Page 1 and 2: GV-DSP LPRUser's ManualBefore attem
Page 3: PrefaceWelcome to the GV-DSP LPR Us
Page 6 and 7: Recognition Engine VersionRecogniti
Page 8 and 9: 1Introduction1.2 Packing List1. AC
Page 10 and 11: 1Introduction1.4.1.2 GV-DSP LPR V21
Page 12 and 13: 1Introduction1.4.2.2 GV-DSP LPR V2F
Page 16 and 17: 3Accessing the GV-DSP LPRChapter 3
Page 18 and 19: 3Accessing the GV-DSP LPR3.2.1 The
Page 20 and 21: 3Accessing the GV-DSP LPR3.2.3 Snap
Page 22 and 23: 4Administrator ModeChapter 4 Admini
Page 24 and 25: 4Administrator Mode[Engine Setting]
Page 26 and 27: 4Administrator Mode• I/O: Activat
Page 28 and 29: 4Administrator ModePOS Overlay Plat
Page 30 and 31: 4Administrator Mode• Maximum numb
Page 32 and 33: 4Administrator Mode4.2 I/O ControlT
Page 34 and 35: 4Administrator Mode4.3 Events & Ale
Page 36 and 37: 4Administrator Mode[Configure conne
Page 38 and 39: 4Administrator ModeTo enable the DD
Page 40 and 41: 4Administrator Mode4.5 ManagementTh
Page 42 and 43: 4Administrator Mode4.5.2 Storage Se
Page 44 and 45: 4Administrator Mode4.5.4 Log Inform
Page 46 and 47: 5Advanced ApplicationsChapter 5 Adv
Page 48 and 49: 5Advanced Applications2. Double-cli
Page 50 and 51: 5Advanced Applications5.2 Backing U
Page 52 and 53: 5Advanced Applications5.3 Restoring
Page 54 and 55: 6The I/O Terminal BlockRelay Output
Page 56 and 57: 6The I/O Terminal BlockRelay Output
Page 58 and 59: SpecificationsSpecificationsModel G

GV-DSP LPR - Surveillance System, Security Cameras, and CCTV ...

Create successful ePaper yourself

Delete template?

Save as template?