Lovis 2000 M_ME - Reference Manual.pdf

7 Settings and Methods SECTION I : Lovis 2000 M/ME ReferenceLovis standardFig. 7 - 1Fig. 7 - 2Example Method Lovis standardExample Method Lovis detailed• Lovis Dynamic Viscosity, Lovis KinematicViscosity, Lovis Average Runtime, LovisVariation Coefficient, Lovis Capillary State,Lovis Temperature, Lovis Density, LovisCondition• Var. Coeff. set by default: 0.10 %• Default measurement mode: S (Standard)• For use without DMA M / DSA M.• If viscosity results are required, the sampledensity must be entered manually in thesample list.• General purpose method.Lovis detailed• Lovis Runtime Details (runtimes of everyforward and backward run), Lovis Density,Lovis Capillary State, Lovis Temperature,Lovis Set Temperature, Lovis Condition,Lovis Shear Rate, Lovis VariationCoefficient, Lovis Forward/BackwardDeviation, Lovis Measuring Length, LovisDynamic Viscosity, Lovis KinematicViscosity.• Var. Coeff. set by default: 0.10 %• Default measurement mode: S (Standard)• For use without DMA M / DSA M• To get viscosity results, the sample densitymust be entered manually in the sample list.• Provides detailed measuring data.Fig. 7 - 3Example Method Lovis / DMALovis / DMA – available only in combination withDMA M/DSA M• Lovis Runtime Details (runtimes of everyforward and backward run), Lovis DynamicViscosity, Lovis Kinematic Viscosity, LovisTemperature, Lovis Capillary State, LovisVariation Coefficient, Lovis Shear Rate,Master Condition, Density, DensityTemperature, U-View• Var. Coeff. set by default: 0.10 %• Default measurement mode: S (Standard)• For use with DMA M/DSA M, the measureddensity is used automatically to calculateviscosity results.• For use with DSA M display sound velocityin one output field (e.g. instead of the shearrate). See the Instrument Firmware Manual.• General purpose method.46 C72IB002EN-E