Lovis 2000 M_ME - Reference Manual.pdf

7 Settings and Methods SECTION I : Lovis 2000 M/ME ReferenceIf you need other method settings to suit your application:• Edit an existing method or• Create a new method7.2.2 Creating, Editing and Deleting Measuring Methods1. Tap "Menu > Methods > Method Management". Select a method from thelist.• Tap to copy a method. Enter a new name for this method. Edit thenew method as described in Chapter 7.2.5.• Tap to assign a new name to method.• Tap to delete a method.You cannot rename or delete the currently used method.To change method parameters that do not only affect Lovis 2000 M/ME, refer tothe Instrument Firmware Manual or to the instruction manual(s) of the otherinstruments/modules of the assembly.7.2.3 Measurement Mode SettingsThis chapter explains the measurement modes which define what kind of test isperformed.1. Tap "Menu > Methods > Method Settings". Select a method ("MethodName") from the list.2. Select a "Measurement Mode (XX)".Lovis Measurement ModesS (Standard)C (Check)MM (MultipleMeasurement)RM (RepeatedMode)To perform a single temperature / single angle test.To perform one of the predefined checks.It is only possible to select a check which has beendefined for the selected method before. Checks aresingle temperature / single angle tests. Refer to theLovis 2000 M/ME Reference Manual for details.To perform a single temperature / single angle testrepeatedly (2 to 10 times, as defined).To perform up to 5 repeated measurements withrefilling liquid from the same syringe or sample vial(if using an Xsample model) without cleaning inbetween.The repeat deviation between determinations can becalculated (see "Repeated Mode Settings").48 C72IB002EN-E