2002 Replacement Parts Catalog - cedip

Bonnet Seal Carriers for U, UM and U II BOPsThe bonnet seal carrier is a bore-type sealing assembly which replaces the face sealused as the previous bonnet seal. Sealing capability is not dependant upon bonnetbolt torque. One seal is captured in a machined bore in the BOP body while theother seal is captured in a machined bore in the intermediate flange.The seal carrier was designed, developed and performance-verified for use in newlymanufactured BOPs or as a replacement seal assembly for BOPs where either theBOP body or the intermediate flange requires weld repair on the sealing surfaces.Part Numbers for Bonnet Seal Carriers for U, UM and U II BOPsBOPTypeU, UMU, UMU, UMU, UMUIIBOPSize11”3000, 5000 and10,000 psi13-5/8”10,000 psi13-5/8”15,000 psi18-3/4”10,000 psi18-3/4”10,000 and15,000 psiSeal Carrier Retainer Ring Bonnet SealsQty. Part Number Qty. Part Number Qty. Part Number2 645464-02-00-01 2 702645-27-61 4 645484-02-00-012 645507-01-00-01 2 702645-27-91 4 645509-01-00-012 2010145-01 2 702645-27-71 4 2010146-012 2010185-01 2 702645-28-31 4 2010184-012 645464-01-00-02 2 645485-01-00-01 4 645484-01-00-01TC1001 59 © 2002 Cooper Cameron, Cameron Division