REGISTER OVERVIEW PLASTICS

More documents

Recommendations

Info

PP PP (polypropylene) Material density: 0.91 g/cm 3 Service temperature: +/–0 °C to +80 °C Without significant mechanical stress and with air as the surrounding medium, up to +100 °C More rigid, harder and stronger than PE. • High chemical resistance • Very good electrical insulating properties • Almost no moisture absorption • Combustible according to DIN 4102 B2 • Physiologically safe (according to BGA/FDA) • Anti-adhesive properties (so 100 % sticking not possible) Comment: PP is not generally designed for outdoor use. For restrictions in terms of chemical resistance, see the separate data sheet. Due to the way they are manufactured, pressed boards are more neutral in terms of stress and priority should be given to them for milled parts. Telephone hotline: +49 1803 00 26 22 40 / Fax hotline: +49 1803 00 26 22 41 9 cents/60 sec. from the German fixed network <strong>PLASTICS</strong> 13/23 Material name PP DWU PP DWST PPs Name according to DIN ISO 1043 PP grey PP natural PP low flammability Technical data Norm Unit Density ISO 1183 g/cm3 0.91 0.90 0.95 Yield stress DIN EN ISO 527 MPa 32 30 32 Elongation under yield stress DIN EN ISO 527 % 8 8 8 Elongation at tear DIN EN ISO 527 % 70 70 70 Tensile modulus of elasticity DIN EN ISO 527 MPa 1400 1400 1300 Impact strength DIN EN ISO 179 kJ/m2 No breakage No breakage No breakage Notch toughness DIN EN ISO 179 kJ/m2 6 6 7 Ball indentation hardness DIN EN ISO 2039-1 MPa 70 70 70 Shore hardness Average ISO 868 D 72 72 72 linear coefficient of thermal expansion DIN 53752 K –1 1.6 x 10 –4 1.6 x 10 –4 1.6 x 10 –4 Thermal conductivity DIN 52612 W/m-K 0.22 0.22 0.22 Fire behaviour DIN 4102 Standard flammable Grades: Extruded/pressed design, colour natural/pebble grey Other PP grades on request Application: Machine tools, chemical equipment and laboratory construction, electroplating technology, use wherever physiological safety is required Processing: Hot forming, welding, machining, Sticking properties: high bonding strength not possible Printing: surface pre-treatment required Good cutting properties Dimensions: Boards 0.5 – 40 mm extruded design – Dim. 2000 x 1000 mm 10 – 200 mm pressed design – Dim. 2000 x 1000 mm Other board sizes on request Round rods: 8 – 500 mm diameter, lengths of 1000/2000 mm Tolerances: See technical knowledge Standard tolerances for thermoplastic/thermosetting plastic materials Weight indications are theoretical. Standard flammable Standard flammable Dielectric strength IEC 243-1 kV/mm 52 58 22 Surface resistivity DIN IEC 167 Ohm 1014 1014 1014 Usable temperature range °C 0 to +100 0 to +100 0 to +100 Chemical resistance Physiologically safe Very good in contact with many acids, alkalis and solvents according to BgVV (Federal Institute of Consumer Health Protection and Veterinary Medicine) Processing Yes Yes No Welding Yes Yes Yes Bonding, GFRP coating Possible with laminated boards Painting, printing Only possible following pre-treatment Hot forming Properties and applications Good Good Good Extremely thermally stable, particularly for applications in tank and equipment construction Physiologically safe, particularly for applications in the food industry Extremely thermally stable, particularly for use in the construction of ventilation systems
13/24 <strong>PLASTICS</strong> PP BOARDS Extruded Item No. natural Item No. grey Thickness mm Density: 0.92 g/cm 3 Service temperature: +/-0 °C to +80 °C, without mech. stress up to +100 °C Colour: natural, not UV-resistant, grey, UV-resistant to a limited extent Length mm Width mm Weight/unit kg €/kg natural 10030727 180810 1 2000 1000 1.800 5.56 5.56 180990 386910 2 2000 1000 3.600 5.05 5.05 404820 180830 3 2000 1000 5.500 5.05 5.05 181010 387000 4 2000 1000 7.300 5.05 5.05 181020 180850 5 2000 1000 9.200 5.05 5.05 404830 387010 6 2000 1000 11.000 5.05 5.05 181040 180870 8 2000 1000 14.600 5.05 5.05 404840 387020 10 2000 1000 18.300 5.05 5.05 181060 180890 12 2000 1000 22.000 5.05 5.05 404850 404790 15 2000 1000 27.500 5.05 5.05 181080 180910 20 2000 1000 36.400 5.05 5.05 404860 404800 25 2000 1000 45.800 5.05 5.05 181100 180930 30 2000 1000 54.900 5.05 5.05 10002777 569140 35 2000 1000 64.500 6.46 6.46 620030 180950 40 2000 1000 73.200 6.46 6.46 404810 50 2000 1000 92.500 8.29 Pressed Item No. natural Item No. grey Thickness mm Density: 0.92 g/cm 3 Service temperature: +/-0 °C to +80 °C, without mech. stress up to +100 °C Colour: natural, not UV-resistant, grey, UV-resistant to a limited extent Length mm Width mm Weight/unit kg €/kg natural 4403220 4403110 10 2000 1000 18.200 9.23 9.23 4403230 4403120 12 2000 1000 21.800 9.23 9.23 4403240 4403130 15 2000 1000 27.300 8.20 8.20 4403250 4403140 20 2000 1000 36.400 8.20 8.20 4403260 4403150 25 2000 1000 45.500 8.20 8.20 4403270 4403160 30 2000 1000 54.600 8.20 8.20 4403280 4403170 40 2000 1000 72.800 8.20 8.20 1091670 4403180 50 2000 1000 91.000 8.20 8.20 470060 180970 60 2000 1000 109.200 8.20 8.20 4403290 4403190 70 2000 1000 127.400 8.20 8.20 4403300 4403200 80 2000 1000 145.600 8.20 8.20 4403310 4403210 90 2000 1000 163.800 8.77 8.77 569650 620040 100 2000 1000 182.000 8.77 8.77 Shop €/kg grey €/kg grey plastics@reiff-group.com / www.reiff-tp.com
Page 1 and 2: 13/6 PLASTICS REGISTER OVERVIEW PLA
Page 3 and 4: 13/8 PLASTICS SELECTION GUIDE FOR S
Page 5 and 6: 13/10 PLASTICS ABS ABS copolymers I
Page 7 and 8: 13/12 PLASTICS uPVC (UNPLASTICISED
Page 9 and 10: 13/14 PLASTICS UPVC BOARDS Extruded
Page 11 and 12: 13/16 PLASTICS UPVC TUBES Extruded
Page 13 and 14: 13/18 PLASTICS PPVC Boards/Films It
Page 15 and 16: 13/20 PLASTICS PE HD Material chara
Page 17: 13/22 PLASTICS PE ROUND RODS Extrud
Page 21 and 22: 13/26 PLASTICS TECHNICAL SEMI-FINIS
Page 23 and 24: 13/28 PLASTICS TECHNICAL SEMI-FINIS
Page 25 and 26: 13/30 PLASTICS PHYSICAL PROPERTIES
Page 27 and 28: 13/32 PLASTICS PA 6 BOARDS Extruded
Page 29 and 30: 13/34 PLASTICS PA 6 ROUND RODS Extr
Page 31 and 32: 13/36 PLASTICS PA 6.6 ROUND RODS Ex
Page 33 and 34: 13/38 PLASTICS POM/PET Product desc
Page 39 and 40: 13/44 PLASTICS POM C ROUND RODS Ext
Page 41 and 42: 13/46 PLASTICS PET ROUND RODS Extru
Page 43 and 44: 13/48 PLASTICS PE HD UHMW Product d
Page 45 and 46: 13/50 PLASTICS PE 1000 BOARDS Press
Page 47 and 48: 13/52 PLASTICS PMMA ACRYLIC GLASS P
Page 49 and 50: 13/54 PLASTICS PC MAKROLON ® Techn
Page 51 and 52: 13/56 PLASTICS PC MAKROLON ® Board
Page 53 and 54: 13/58 PLASTICS PET Properties of PE
Page 55 and 56: 13/60 PLASTICS PETG Properties of P
Page 57 and 58: 13/62 PLASTICS uPVC GLASS pPVC TRAN
Page 59 and 60: 13/64 PLASTICS PPVC Boards/Films It
Page 61 and 62: 13/66 PLASTICS HIGH-PERFORMANCE PLA
Page 63 and 64: 13/68 PLASTICS LIFE SCIENCE GRADES
Page 65 and 66: 13/70 PLASTICS DURATRON ® PI Prope
Page 69 and 70:
13/74 PLASTICS Quadrant ® PPSU Qua
Page 71 and 72:
13/76 PLASTICS Symalit ® 1000 PVDF
Page 73 and 74:
13/78 PLASTICS PEEK 1000 BOARDS Ket
Page 75 and 76:
13/80 PLASTICS TECHTRON ® PPS DURA
Page 77 and 78:
13/82 PLASTICS PVDF 1000 BOARDS PVD
Page 79 and 80:
13/84 PLASTICS PHYSICAL PROPERTIES
Page 81 and 82:
13/86 PLASTICS PTFE ROUND RODS Virg
Page 83 and 84:
13/88 PLASTICS CONDUCTIVE PLASTICS
Page 85 and 86:
13/90 PLASTICS CONDUCTIVE PLASTICS
Page 87 and 88:
13/92 PLASTICS BOARDS FOR THE ADVER
Page 89 and 90:
13/94 PLASTICS LF (LAMINATED FABRIC
Page 91 and 92:
13/96 PLASTICS LF PANELS Type 2082
Page 93 and 94:
13/98 PLASTICS LP (LAMINATED PAPER)
Page 95 and 96:
13/100 PLASTICS LP BOARDS Type 2061
Page 97 and 98:
13/102 PLASTICS PUR (POLYURETHANE)
Page 99 and 100:
13/104 PLASTICS PUR BOARDS Polyuret
Page 101 and 102:
13/106 PLASTICS INFORMATION ABOUT M
Page 103 and 104:
13/108 PLASTICS INFORMATION ABOUT M
show all

REGISTER OVERVIEW PLASTICS

Create successful ePaper yourself

Delete template?

Save as template?