REGISTER OVERVIEW PLASTICS

13/10 PLASTICS
ABS
ABS copolymers
Item No.
Thickness
mm
Length
mm
Width
mm
Weight/unit
kg €/kg
176960 2 2000 1000 4.240 9.75
176970 3 2000 1000 6.420 9.75
176980 4 2000 1000 8.560 9.75
176990 5 2000 1000 10.700 9.75
177000 6 2000 1000 12.840 9.75
427580 8 2000 1000 17.120 9.75
Technical information:
In Chapter 14 "Technical Knowledge" starting
on page 93 we inform you in detail.
ABS (acrylonitrile-butadiene-styrene
copolymers)
ABS types are rigid and impact-resistant
even at low temperatures, thanks to
butadiene rubber. They are very hard, whilst
also offering good scratch and chemical
resistance. ABS is less ageing and weatherresistant
than other types.
- Good mechanical strength
- Good impact strength
- Good further processing characteristics
- Good dielectric properties
- Good hardness and dimensional stability
- Low moisture absorption
- Combustible (adjustments can be made
to make it non-flammable)
- Physiologically safe
Comment:
ABS is not suitable for mechanical sliding
functions.
Grades: modifications available on request,
not transparent due to rubber component,
rather, opaque white.
Use: technical parts subject to impact stress
including housings and covering parts, also
for low temperatures
Processing: hot forming, bonding, welding,
machining, printing
Density: 1.07 g/cm 3
Service temperature:
- 45 °C to + 85 °C, some up to 100°
Colour: white
plastics@reiff-group.com / www.reiff-tp.com