Catalogue 2010

Pipe blocks for plug-in system 15-22 mm
Maximum operating pressure 15 bar at 20°C. With technical inspection certificate.
Pipeline socket Basis G1“
• Universal use for air distribution in the
pipe system
• Can be used as an air inlet box, transverse
distributor and dead-end distribution
box
• Ideal for combining with the plug-in
system 28 mm and the corresponding
pipe clamps because the wall clearance is
perfectly matched
• 4 air inlets in G1“i, 1air outlet G1/2“i with
interface for Topsocket
• Body made of black, hard-anodised
aluminium, lasered logo
• Dimensions LxWxH: 90x90x53 mm
Type Art. no.
RLD-B 4x1i-1/2i E800234
Accessories Type Art. no.
Pipeline socket Top G1/2“
Pipeline socket Top G1/2“
Reduction fitting RDS-G1 xG3/4i E770079
• The perfect extension of the Basis sockets G1/2“
and G1“
• For creating additional air outlets
• Easy to assemble: simply screwed onto the Basis
socket
• Including assembly material, sealing and transport
protective cap -toprevent loss of equipment
• Body made of impact-resistant, glass-fibre reinforced
polyamide (PA6 GF30)
• Dimensions including screen LxWxH: 83x83x45
mm
• With 2air outlets G1/2“i, with brass thread
• The perfect extension of the Basis sockets
G1/2“ and G1“
• For creating additional air outlets
• Easy to assemble: simply screwed onto the
Basis socket
• Including assembly material, sealing and
transport protective cap -toprevent loss of
equipment
• Body made of impact-resistant, glass-fibre
reinforced polyamide (PA6 GF30)
• Dimensions including screen LxWxH: 83x83x45
mm
• With 3air outlets G1/2“i, with brass thread
Type Art. no.
RLD-T 2x1/2i E800240
Type Art. no.
RLD-T 3x1/2i E800241
127
3|Compressed air distribution