Catalogue 2010

Compressors, stationary
10+Master STV as
compressed air complete
system
Type Art. no.
Pressure
(bar)
If more than 10 bar is required –
With complete condensate purification unit
Common features
• V-belt driven 2-cylinder unit with 2-stage
compression for 15 and 12 bar increases the
output and guarantees high efficiency
• Vessel with burned-in interior coating
• 15-year rust guarantee on all vessels
• Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic operation,
motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
• Standard features include: rubber vibration
elements
• Electrical connection 400 V/50 Hz (threephase
current)
• For compressors with a4kWmotor, observe
the regulations stipulated by the local power
station
Suction
capacity
(l/min)
Eff. delivery
quantity
(l/min) 2)
Drive power
(kW)
Speed
(min-1 )
Tank vol.
(l)
• Itiscompulsory for all compressors and
power units above 5.5 kW to be started via
an automatic star-delta switch. This switch is
not included in the scope of delivery but the
start-up relief is
• The low speed of rotation reduces vibrations,
preserves the compressor components and
reduces noise levels
• Large ventilator flywheel for optimal cooling
• Safety pan available as an option
• Intermediate cooler and aftercooler quickly
cool the generated compressed air
• With Ecomat 3100 condensate discharger
and complete ÖwaDry module, consisting of
cold dryer, microfilter and oil-water separator
• For producing high-quality compressed air
and purifying condensate in accordance with
§7aofthe German Water Resources Act
ZPM STV 575-15-300 DKS H113020 15 575 460 4,0 850 300 261 83 3/4“i 850x1210x1905
ZPM STV 750-15-500 DKS 3) H113021 15 750 600 5,5 785 500 390 82 3/4“i 1050x1350x2170
1) Sound pressure level at distance of 1maccording to DIN 45635, T13 2) 15 bar systems measured at 12 bar as per ISO 1217 3) Please order star-delta switches separately
• Retrofit set for catching dirt and oil during mainte-
Safety trough Type Art. no.
10+Master STH
Type Art. no.
Pressure
(bar)
nance. Consisting of stable steel plate with safety
pan and rubber dampers
If more than 10 bar is required –
The traditional solution with horizontal vessel
Common features
• V-belt driven 2-cylinder unit with 2-stage
compression for 15 bar increases the output
and guarantees high efficiency
• Above 7.5 kW V-belt driven 4-cylinder unit
• Vessel with burned-in interior coating
• 15-year rust guarantee on all vessels
• Electrical connection 400 V/50 Hz (threephase
current)
• For compressors with a4kWmotor, observe
the regulations stipulated by the local power
station
• Itiscompulsory for all compressors and
power units above 5.5 kW to be started via an
automatic star-delta switch. This switch is not
included in the scope of delivery but the startup
relief is
Suction
capacity
(l/min)
Eff. delivery
quantity
(l/min) 2)
Drive power
(kW)
Weight
(kg)
Noise
(dB(A)) 1)
Air outlet
Dimensions
(W xDxH)
SW-STV-Set B135001
• Intermediate cooler and aftercooler quickly
cool the generated compressed air
• Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic operation,
motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
• Easily accessible condensate trap under the
vessel. Also suitable for simple connection of
an Ecomat condensate discharger
ZPM STH 575-15-300 H113005 15 575 460 4,0 850 300 191 83 3/4“i 1370x620x1230
ZPM STH 575-15-500 H113006 15 575 460 4,0 850 500 218 83 1“i 2000x730x1350
ZPM STH 750-15-500 3) H113007 15 750 600 5,5 785 500 280 82 1“i 2000x730x1350
ZPM STH 1200-15-500 3) H113008 15 1200 820 7,5 690 500 370 86 1“i 2000x740x1320
1) Sound pressure level at distance of 1maccording to DIN 45635, T13 2) 15 bar systems measured at 12 bar as per ISO 1217 3) Please order star-delta switches separately
Speed
(min-1 )
Tank vol.
(l)
Weight
(kg)
Noise
(dB(A)) 1)
Air outlet
Dimensions
(W xDxH)
53
1|Generating compressed air