Catalogue 2010

2|Purifying compressed air
96
Maintenance units
Mist oiler
Lubricator 1/4“
Type Art. no.
Connecting
thread
• Fine adjustment for aregular oil supply
• Proportional adjustment of the oil supply to
the air flow rate for optimal lubrication, even
at low pressures and low air flow rates
• Oil purification downstream of the filter pressure
reducer
• Can be integrated anywhere due to compact
dimensions
Dimension
A
(mm)
Lubricator 3/8“ -1/2“ Lubricator 3/4“ -1“
N1/4 W D223001 G1/4“i 42 156 42 42 32 50
N3/8 W D323001 G3/8“i 60 195 60 60 46 150
N1/2 W D423001 G1/2“i 60 195 60 60 46 150
N3/4 W D523001 G3/4“i 80 260 80 80 66 379
N1W D623001 G1“i 80 260 80 80 66 379
Dimension
B
(mm)
Dimension
C
(mm)
2-way filter unit • Consists of filter pressure reducer and mist
oiler
• Fully assembled
• Regulation range 0-12 bar
• Semi-automatic drainage
Type Art. no.
Connecting
thread
WE 2-fach 1/4 W D226026 G1/4“i
WE 2-fach 3/8 W D326026 G3/8“i
WE 2-fach 1/2 W D426026 G1/2“i
WE 2-fach 3/4 W D458405 G3/4“i
WE 2-fach 1W D468405 G1“i
Flow charts: Measurement carried out at different
admission pressures: A=2bar; B=4bar; C=
6bar, D=8bar; E=10bar. The pressure drop
is shown in bar. Example: mist oiler 1/4“: at an
admission pressure of8bar (=D) and apressure
drop of 0.4 bar, the maximum flow rate is 800
l/min.
Dimension
D
(mm)
Dimension
E
(mm)
Oil reservoir
volume
(cm³)
• Standard features include: pressure gauge
and 20 µm filter element
• For installation in machines or mounting on
walls
• The technical data corresponds to that of the
individual components