Catalogue 2010

4|Using compressed air
Blasting devices
Pressure blasting device • Galvanised 24 lvessel with all the necessary
safety fittings
• Water separator at the air inlet and pressure
reducer for adjusting the material pressure
• For blasting abrasive with grit up to 0.8 mm
234
Type Art. no.
Air requirements
(l/min)
Working
pressure
(bar)
Scope of delivery: Pressure vessel, blasting hose
unit, pressure spray gun. The blasting hose unit
is 10 mlong
Material
pressure
(bar)
DSG 10 D040096 250-300 5-8 0,5-2,0 27 24 0,2-0,8
Accessories Type Art. no.
Weight
(kg)
Tank vol.
(l)
Nozzle ED-DSG B030028
Material hose SL-Set-M12,7-D6/5m D740009
Material hose SL-Set-M12,7-D6/10m D740010
Spray protective hood Type Art. no.
• Robust plastic housing
• Large, replaceable glass observation
window
• Neck protection
Grit
STSH D770121
Accessories for sand blasting, general Type Art. no.
SBE-Acetat 90x110 STSH G526002
SBE-Min-glas 90x110 STSH G526003
Blasting abrasive Type Art. no.
• Ground blast furnace slag
• Grain 0.2 -0.8 mm
• Does not cause silicosis
• Suitable for all listed spray guns and
devices
• Contents 7.0 kg
STM-HOS 7,0 B030031