metric Oscillator - Beckman Institute Laser Resource Center

Use of controls or adjustments, or performance of procedures other thanthose specified herein may result in hazardous radiation exposure.Follow the instructions in this manual for proper installation and safeoperation of your laser accessory. At all times during installation, maintenance orservice of your laser accessory, avoid unnecessary exposure to laser or collateral*radiation that exceeds the accessible emission limits listed in "Performance standardsfor Laser Products" 21 CFR 1040 10(d)We recommend the use of protective eyewear whenever possible; selectiondepends on the energy and wavelength of the laser beam used as well as operatingconditions. Consult relevant OSHA, ACGIH or ANSI standards for further guidance.* Any electronic product radiation, except h er radiation, emitted by a laserproduct as a result of or necessary for the operation of a laser incorporatedin to that product.Maintenance Required To Keep This Laser Product In Compliance with Cenkr ForDevices And Rdological Health (CDRH) RegulationsThis laser product complies with Title 21 of the United States Code of FederalRegulations, Chapter 1, Subchapter J, parts 1040.10 and 1040.11, as applicable.The MOP0 700 series is a passive laser accessory. As such, it has no inherent interlockdevices. For verification of CDRH safety compliance including interlocks, verifypump laser safety features. To maintain compliance, verify the operation of all featureslisted in your Nd:YAG pump laser manual, either annually or whenever the producthas been subjected to adverse environmental conditions (eg. fire, flood, mechanicalshock, spilled solvents). The features are identified on the radiation control drawing(figure 2-2).Figure 2-2 MOPO-710 Radiation Control Drawing