Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4<br />
4. Status<br />
4. Status<br />
4.1. Status<br />
All values displayed in the Status are read-only. To change the inverter settings, see the Setup<br />
section. For a detailed description of the individual settings, refer to the TripleLynx CN Reference<br />
Manual.<br />
As the values are requested live from the inverter, short delays may occur in retrieving data.<br />
Fetch the newest inverter data by pressing the 'Reload' button.<br />
4.2. Ambient Conditions [0] [<strong>Inverter</strong>]<br />
If external sensors are connected to the inverter, their current values are displayed here.<br />
Illustration 4.1: Ambient Conditions<br />
4.3. Photovoltaic [0] [<strong>Inverter</strong>]<br />
In the photovoltaic status, menu all status information and settings related to the PV side of the<br />
inverter are displayed.<br />
4.3.1. PV Present Values<br />
[0] [<strong>Inverter</strong>]<br />
The voltage, current and power detected on each PV input are displayed here.<br />
4.3.2. PV Maximum Values [0] [<strong>Inverter</strong>]<br />
The maximum values of voltage, current and power recorded on each PV input are displayed<br />
here.<br />
The maximum values can be reset via [<strong>Inverter</strong> view → Setup → <strong>Inverter</strong> details → Reset max.<br />
values].<br />
4.3.3. PV Input Energy [0] [<strong>Inverter</strong>]<br />
The total daily energy produced by all three PV inputs as a sum and by each PV input individually<br />
are shown.<br />
Note:<br />
If two inputs are running in parallel configuration, only one value will be shown.<br />
20 L00410583-01_02