Plant, Inverter - Danfoss

4
4. Status
4.6. Reactive Power [1] [Plant]
The setpoint type and setpoint value of reactive power are displayed here, for TLX CN Pro+
variants only.
Item Description
Setpoint type Displays the setpoint type
Value Displays the value of the setpoint
4.7. Inverter [0] [Inverter]
The status inverter content page displays the general status of the complete inverter.
4.7.1. General [0] [Inverter]
Note:
When calling Service, note that the information listed on this web page is required in order
to obtain assistance.
The general settings of the inverter are displayed here.
Item Description
Country Installation country.
Language Language of inverter display and Web Server software. The session language
of the Web Server software can also be changed via the footer.
Name *) Displays the current name of the inverter.
Group name *) Displays the name of the group to which the inverter belongs. *)
Operation mode Displays the current mode of operation of the inverter.
Installation date The date on which the inverter was installed. *)
Model Current model and inverter power class.
Serial number The serial number of the inverter.
Product number The product number of the inverter.
Software version The software version of the inverter.
MAC address The MAC address of the communication board.
*) These names can be changed in inverter view at [Inverter view → Setup → Inverter details].
4.7.2. DC bus voltage [1] [Inverter]
The current and maximum values of the DC bus voltage are shown here. The DC bus voltages
have both a lower and an upper limit.
4.7.3. PCB Temperatures [0] [Inverter]
Internal temperatures of the inverter PCB’s:
• current temperature
• maximum temperature [1]
Note:
Some PCB temperatures are only accessible at security level 1 or above.
22 L00410583-01_02