You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Note:<br />
It is only possible to replicate the settings of the master inverter to the other inverters in the<br />
network.<br />
6.11.2. Settings Backup [1] [<strong>Inverter</strong>]<br />
When settings are changed, the inverter backs up its production log, and updates settings stored<br />
in the display unit.<br />
Stored data are::<br />
• Timestamp<br />
• Setup details<br />
- Language<br />
- Country<br />
- PV Configuration<br />
• Energy production log<br />
• Irradiation log<br />
• Communication setup<br />
- RS485 network address<br />
- IP configuration<br />
- IP address<br />
• <strong>Inverter</strong> details<br />
• Messaging<br />
- <strong>Inverter</strong> name<br />
- Group name<br />
- <strong>Inverter</strong> type<br />
• Logging interval<br />
• Data warehouse service<br />
• GPRS communication setup<br />
• Sensor calibration values<br />
• Environmental settings (settings for revenue and CO2 emission)<br />
• PV array settings<br />
Via the Web Server software these settings can be dumped to a file and saved locally on a PC.<br />
Afterwards the file can be loaded to another inverter.<br />
Upload and set the backup file before the inverter has commenced energy production. This ensures<br />
the settings are used before being superseded.<br />
6. Setup<br />
L00410583-01_02 53<br />
6
Change language