XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set5.7 AT^SPWDs5.7 AT^SPWD Change PasswordThe AT^SPWD command provides the same functions as AT+CPWD. The major difference between both commandsis that, apart from the different prefixes "^SPWD" and "+CPWD", the AT^SPWD command includes additionalfunctions dedicated to the Customer SIM Lock. Please note that this feature is only supported byspecifically pre-configured XT55 modules and, therefore, not part of the standard "XT55 AT Command Set".Ordering information and a detailed description of the "Customer SIM Lock" feature can be requested from Siemens.All other functions and parameters of AT^SPWD are described in Section 5.6, AT+CPWD.Each password is a string of digits the length of which varies with the associated facility. The test commandreturns a list of pairs which represent the available facilities and the maximum length of the associated password.See also AT commands AT+CLCK and AT^SLCK for more detail on the various lock features.SyntaxTest CommandAT^SPWD=?Response(s)^SPWD:list of supported ( , )OKWrite CommandAT^SPWD=, [, ]Response(s)New password has been registered for the facility lock function.OKIf parameter was not correct:+CME ERROR 16 (+CME ERROR: incorrect password)If the password for the selected has been invalidated due to too many failed attempts:+CME ERROR ...If error is related to ME functionality:+CME ERRORPIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last% % % % % % ! ! !Note• When changing the PIN2 (="P2") it is recommended to check the new state of PIN2 using theAT+CPIN2 command.XT55_ATC_V03.03 Page 117 of 459 9/9/05Confidential / Released