XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set8.10 AT^SMONGs8.10 AT^SMONG GPRS MonitorThe AT^SMONG command supplies GPRS specific cell information. There are two ways to retrieve the information:once on request by using the execute command or automatically every seconds by using thewrite command. To stop the periodic presentation type "AT" or "at".SyntaxTest CommandAT^SMONG=?Response(s)^SMONG:(list of supported s), (list of supported s)OKERROR+CME ERRORExec CommandAT^SMONGResponse(s)GPRS MonitorCell Info Table (see: Section 8.10.1, AT^SMONG Cell Info Table)OKERROR+CME ERRORWrite CommandAT^SMONG=[, ]Response(s)^SMONG: GPRS MonitorCell Info Table (see: Section 8.10.1, AT^SMONG Cell Info Table)OKERROR+CME ERRORReference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge LastSIEMENS % % % % % % ! ! !Parameter Description (num)1 Cell Info Table (num)Display period in secondsIf is omitted the cell data will be presented only once on a single line (as if Execute command wasissued).If is given, the cell data will be listed repeatedly on 10 data lines. Every 10 th data line is followed bythe header, simply to repeat the column titles.1...100XT55_ATC_V03.03 Page 181 of 459 9/9/05Confidential / Released