XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set10.2 AT^SISSs10.2 AT^SISS Internet Service Setup ProfileAT^SISS serves to set up the necessary parameters in the Internet service profiles. Any service profile can thenbe used to control a data link in conjunction with AT^SISO, AT^SISC, AT^SISR and AT^SISW.The AT^SISS read command requests the current settings of all Internet service profiles. One line is issued forevery possible parameter of a given "srvType" value.The AT^SISS write command specifies the parameters for a service profile identified by . Atfirst the type of Internet service needs to be selected via value "srvType". This determines theapplicability of all other values related to this "srvType" and sets their defaults. An exception isthe which can be set before or after selecting "srvType". To change the settingsthe write command needs to be executed for each single .All profile parameters set with AT^SISS are volatile. Therefore, the best practice is to use scripts and let the hostapplication handle the required AT commands.The list below shows which parameters apply to each Internet service and which of them aremandatory or optional.1. "Socket"- "address" (mandatory)- "conId" (mandatory)Internet connection profile.- "alphabet" (optional)2. "FTP"- "address" (mandatory)- "conId" (mandatory)Internet connection profile.- "alphabet" (optional)3. "HTTP"- "user" (optional)- "passwd" (optional)- "address" (mandatory)- "conId" (mandatory)Internet connection profile.- "alphabet" (optional)- "hcContent" (optional)- "hcContLen" (optional)- "hcUsrAgent" (optional)- "hcMethod" (mandatory)- "hcProp" (optional)- "hcRedir" (optional)- "hcAuth" (optional)4. "SMTP"- "user" (optional)User name to be used for SMTP authentication.- "passwd" (optional)Password to be used for SMTP authentication.- "address" (mandatory)SMTP server address.- "tcpPort" (optional)TCP port number of SMTP Server.XT55_ATC_V03.03 Page 224 of 459 9/9/05Confidential / Released