XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set7.22 AT+CRs7.22 AT+CR Service reporting controlAT+CR configures the TA whether or not to transmit an intermediate result code +CR: to the TE when acall is being set up.Setting the value of to 1 may lead to connection failure, if the application (e.g. WinFax) waits for defaultresult code/URC.SyntaxTest CommandAT+CR=?Response(s)+CR: (list of supporteds)OKERRORRead CommandAT+CR?Response(s)+CR: OKERRORWrite CommandAT+CR=Response(s)OKERRORReference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge LastGSM 07.07 % % % % % % ! ! !Intermediate Result CodeIf enabled, an intermediate result code is transmitted during connect negotiation when the TA has determinedthe speed and quality of service to be used, before any error control or data compression reports are transmitted,and before any final result code (e.g. CONNECT) appears.+CR: Parameter Description (num)(&W)(&V)0 (&F) Disable1 Enable (str)“REL ASYNC““GPRS“Asynchronous non-transparentGPRSXT55_ATC_V03.03 Page 154 of 459 9/9/05Confidential / Released