XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set11.5 AT+CGEREPs11.5 AT+CGEREP GPRS event reportingThe write command enables or disables sending of unsolicited result codes, "+CGEV" from MT to TE in the caseof certain events occurring in the GPRS MT or the network. controls the processing of unsolicited resultcodes specified within this command. controls the effect on buffered codes when 1 or 2 isentered. If a setting is not supported by the MT, ERROR or +CME ERROR: is returned.Read command returns the current and buffer settings.Test command returns the modes and buffer settings supported by the MT as compound values.SyntaxTest CommandAT+CGEREP=?Response(s)+CGEREP: (list of supported s), (list of supported s)OKRead CommandAT+CGEREP?Response(s)+CGEREP: , OKWrite CommandAT+CGEREP=[[, ]]Response(s)OKERROR+CME ERRORReference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge LastGSM 07.07 % % % % % % ! ! !Unsolicited Result CodesURC 1+CGEV: REJECT , A network request for PDP context activation occurred when the MT was unable to report it to the TE with a+CRING unsolicited result code andwas automatically rejected.URC 2+CGEV: NW REACT , , []The network has requested a context reactivation. The that was used to reactivate the context is providedif known to the MT.URC 3+CGEV: NW DEACT , , []The network has forced a context deactivation. The that was used to activate the context is providedif known to the MT.URC 4+CGEV: ME DEACT , , []The mobile equipment has forced a context deactivation. The that was used to activate the context isprovided if known to the MT.XT55_ATC_V03.03 Page 258 of 459 9/9/05Confidential / Released