XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set7.24 AT+CSNSs7.24 AT+CSNS Single Numbering SchemeSyntaxTest CommandAT+CSNS=?Response(s)+CSNS: (list of supporteds)OKRead CommandAT+CSNS?Response(s)+CSNS: OKWrite CommandAT+CSNS=[]Response(s)OKERROR+CME ERRORReference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge LastGSM 07.07 ! % % % % % ! ! !Command DescriptionThe AT+CSNS command enables the ME to accept incoming calls when no bearer capability information is providedwith the call, e.g. single numbering scheme calls or calls originitating from analog devices.Parameter Description (num)[0] (D) Voice: Each call received without bearer element is assumed to be speech2 Fax: Each call received without bearer element is assumed to be an incomingfax.4 Data: Each call received without bearer element is assumed to be a data call.Please take into account that the bearer service parameters set with AT+CBSTapply to all data calls including those received without bearer capability.Notes• The command must be set before the call comes. By default, when you do not modify the settings, all callsreceived without bearer element are assumed to be voice.• The setting will be automatically saved when you power down the GSM engine with AT^SMSO, provided thatPIN authentication has been done. This value will be restored when PIN authentication is done again.XT55_ATC_V03.03 Page 156 of 459 9/9/05Confidential / Released