XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set11.5 AT+CGEREPsURC 5+CGEV: NW DETACHThe network has forced a GPRS detach.URC 6+CGEV: ME DETACHThe mobile equipment has forced a GPRS detach.URC 7+CGEV: NW CLASS The network has forced a change of MS class. The highest available class is reported.URC 8+CGEV: ME CLASS The mobile equipment has forced a change of MS class. The highest available class is reported.Parameter Description (num)0 (P) Buffer unsolicited result codes in the MT. Currently 3 +CGEV URCs can bebuffered. If MT result code buffer is full, the oldest ones will be discarded. Nocodes are forwarded to the TE.1 Discard unsolicited result codes when MT TE link is reserved (e.g. in on linedata mode); otherwise forward them directly to the TE.2 Buffer unsolicited result codes in the MT when MT TE link is reserved (e.g. inon line data mode) and flush them to the TE when MT TE link becomes available;otherwise forward them directly to the TE. Currently 3 +CGEV URCs canbe buffered. If MT result code buffer is full, the oldest URCs will be discarded. (num)0 MT buffer of unsolicited result codes defined within this command is clearedwhen 1 or 2 is entered1 MT buffer of unsolicited result codes defined within this command is flushed tothe TE when 1 or 2 is entered (OK response will be given before flushingthe codes). Buffer is empty afterwards. (str)Parameter indicates the GPRS mobile class.“B“class BXT55_ATC_V03.03 Page 259 of 459 9/9/05Confidential / Released