XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set9.9 AT+CLIPs9.9 AT+CLIP Calling line identification presentationThis command refers to the GSM supplementary service CLIP (Calling Line Identification Presentation) thatenables a called subscriber to get the calling line identity (CLI) of the calling party when receiving a mobile terminatedcall.SyntaxTest CommandAT+CLIP=?Response(s)+CLIP: (list of supporteds)OKRead CommandAT+CLIP?Response(s)+CLIP: , OKERROR+CME ERROR: Write CommandAT+CLIP=Response(s)OKERROR+CME ERROR: Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge LastGSM 07.07, GSM 02.81 § % % % % % ! ! !Unsolicited Result CodesURC 1Voice call response format:+CLIP: , , , [, ][, ]URC 2Data/FAX call response format:+CLIP: , When CLIP is enabled at the TE (and is permitted by the calling subscriber), an unsolicited result code isreturned after every RING (or +CRING: ) at a mobile terminating call.Command DescriptionTest command returns values supported by the TA as a compound value.Read command gives the status of , and also triggers an interrogation of the provision status of the CLIPservice according GSM 02.81 (given in ).If no SIM card is available or SIM-Pin isn't entered, the command response is "ERROR".Write command enables or disables the presentation of the CLI at the TE. It has no effect on the execution of thesupplementary service CLIP in the network.XT55_ATC_V03.03 Page 207 of 459 9/9/05Confidential / Released