XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set11.7 AT+CGDCONTs11.7 AT+CGDCONT Define PDP ContextSyntaxTest CommandAT+CGDCONT=?Response(s)+CGDCONT: (range of supporteds), , , , (list of supported s), (list of supporteds)OKERROR+CME ERRORRead CommandAT+CGDCONT?Response(s)[+CGDCONT: , , , , , ][+CGDCONT: ...]OKERROR+CME ERRORWrite CommandAT+CGDCONT=[[, [, [, ]]]]Response(s)OKERROR+CME ERRORReference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge LastGSM 07.07 % % % % % % ! ! !Command DescriptionThe test command returns supported values as a compound value.The read command returns the current settings for each defined PDP context.The write command specifies the parameters for a PDP context identified by the context identifier . Thenumber of contexts that may be in a defined state at the same time is given by the range returned by the testcommand. A special form of the write command (AT+CGDCONT=) causes the values for context tobecome undefined.Parameter Description (num)PDP Context IdentifierParameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and isused in other PDP context-related commands.1...2 (str)Packet Data Protocol typeSpecifies the type of the packet data protocol.“IP“ Internet Protocol (IETF STD 5)XT55_ATC_V03.03 Page 262 of 459 9/9/05Confidential / Released