11.07.2015 Views

XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set - Wireless Data Modules

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>XT55</strong> <strong>AT</strong> <strong>Command</strong> <strong>Set</strong>4.8 <strong>AT</strong>+CMUXs4.8 <strong>AT</strong>+CMUX Enter multiplex modeAll information provided in this section applies to the ASC0 interface only. The second interface ASC1 has nosupport of Multiplex mode.Multiplex mode according to the ETSI TS 101 669 and GSM 07.10 enables one physical serial asynchronousinterface to be partitioned into three virtual channels. This allows you to take advantage of up to 3 simultaneoussessions running on the serial interface. For example, you can send or receive data or make a call on the firstchannel, while the other two channels are free to control the module with <strong>AT</strong> commands.The <strong>XT55</strong> module incorporates an internal multiplexer and thus integrates all the functions needed to implementfull-featured multiplex solutions. For the application on top, customers have the flexibility to create their own multiplexprograms conforming to the multiplexer protocol. To help system integrators save the time and expense ofdesigning multiplexer applications, SIEMENS AG offers WinMUX2k, a ready-to-use multiplex driver for Windows2000 and Windows XP. Another approach is to develop customized solutions based on the sources of theWinMux2k driver.Refer to [5] which provides a detailed description of the multiplex architecture and step-by-step instructions ofhow to install and configure the multiplex mode. The WinMUX2k driver and its source files can be supplied onrequest. Please contact your local distributor to obtain the latest installation software and user's guide.SyntaxTest <strong>Command</strong><strong>AT</strong>+CMUX=?Response(s)+CMUX: (list of supporteds)OKRead <strong>Command</strong><strong>AT</strong>+CMUX?Response(s)+CMUX: OKERROR+CME ERROR: Write <strong>Command</strong><strong>AT</strong>+CMUX=Response(s)OKERROR+CME ERROR: Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge LastGSM 07.07, GSM 07.10 ! % ! ! ! ! ! ! %Parameter Description (num)Multiplexer transparency mechanism0 Basic option (num)Subparameters defined in GSM07.07 are adjusted for control and logical channels as follows0 UIH frames used only (control channel)<strong>XT55</strong>_<strong>AT</strong>C_V03.03 Page 93 of 459 9/9/05Confidential / Released

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!