XT55 AT Command Set - Wireless Data Modules

XT55 AT Command Set11.11 AT+CGREGs11.11 AT+CGREG GPRS network registration statusThe write command controls the presentation of an unsolicited result code "+CGREG: " when =1 andthere is a change in the MT's GPRS network registration status.The read command returns the status of result code presentation and an integer which shows whetherthe network has currently indicated the registration of the MT.SyntaxTest CommandAT+CGREG=?Response(s)+CGREG: (list of supported s)OKRead CommandAT+CGREG?Response(s)+CGREG: , OKWrite CommandAT+CGREG=[]Response(s)OKERROR+CME ERRORReference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge LastGSM 07.07 % % % % % % ! ! !Unsolicited Result Code+CGREG: Indicates a change in the MT's GPRS network registration status.Parameter Description (num)0 (P) Disable network registration unsolicited result code1 Enable network registration unsolicited result code "+CGREG: " (num)0 Not registered, ME is not currently searching an operator to register to. The MEis in GMM state GMM-NULL or GMM-DEREGISTERED-INITIATED.The GPRS service is disabled, the ME is allowed to attach to GPRS ifrequested by the user.1 Registered, home network. The ME is in GMM state GMM-REGISTERED orGMM-ROUTING-AREA-UPDATING-INITIATED INITIATED on the homePLMNXT55_ATC_V03.03 Page 273 of 459 9/9/05Confidential / Released