Caché ObjectScript Reference - InterSystems Documentation

More documents

Recommendations

Info

System and Other FunctionsSee Also• KILL command• LOCK command• SET command• $ZUTIL(68,6) Reliable SET Networking Mode Process Switch function$ZUTIL(69,7)Retains or strips extended global reference from globals system-wide.$ZUTIL(69,7,n)$ZU(69,7,n)ParameternThe boolean switch to set the default for handling extended global referencessystem-wide.DescriptionUse $ZUTIL(69,7) to specify the system-wide default setting for the Extended Global Referencemode switch. This switch controls whether namespace names are returned as part ofa global name by the $NAME and $QUERY functions. Caché provides for stripping ofextended global references for purposes of backwards compatibility. The native default forthis switch is 0.0 = Do not strip the extended global reference; this enables extended reference as a systemwidedefault.1 = Strip the extended global reference and return just the global; this disables extended referenceas a system-wide default.Invoking $ZUTIL(69,7) without specifying n returns the current switch setting.For further information on extended global references, see Extended Global References inUsing Caché Multi-Dimensional Storage.644 Caché ObjectScript Reference
NotesThe system-wide default behavior is configurable. Go to the System Management Portal,select System Configuration, select Advanced Settings, on the pull-down Category list selectObjectScript. View and edit the current setting of QueryStripsExtendedRef. The default is“false” .Setting $ZUTIL(69,7) overrides the System Configuration default; it does not change thedefault setting.You can also disable or enable this mode on a per-job basis. For information on how to dothis, see$ZUTIL(68,7) Strip Extended Global References.See Also• $NAME function• $QUERY function• $ZUTIL(68,7) Strip Extended Global References function$ZUTIL(69,8)$ZUTIL(69,8)Sets ZA and ZD locking modes system-wide.$ZUTIL(69,8,n)$ZU(69,8,n)ParameternThe boolean value to set the system-wide default locking behavior when ZA andZD are called.DescriptionInvoking $ZUTIL(69,8,n) causes all ZA (ZALLOCATE) and ZD (ZDEALLOCATE)resource locking commands in Caché mode routines to act in either Open M [DSM] modeor Caché mode. The ZA and ZD commands are obsolete; this function is provided for compatibilityonly.Invoking $ZUTIL(69,8) without specifying n returns the current switch setting.Caché ObjectScript Reference 645
Page 1 and 2:
Caché ObjectScriptReferenceVersion
Page 3 and 4:
Table of ContentsSymbols and Abbrev
Page 5 and 6:
$ORDER ............................
Page 7 and 8:
$ZB ...............................
Page 9 and 10:
$ZUTIL(68,21) .....................
Page 11 and 12:
$ZUTIL(128,1) .....................
Page 13:
List of FiguresClient/Server Connec
Page 16 and 17:
Symbols and AbbreviationsSymbol""##
Page 18 and 19:
Symbols and AbbreviationsSymbol( )*
Page 21 and 22:
Symbols Used in Caché ObjectScript
Page 23 and 24:
Abbreviations Used in Caché Object
Page 25 and 26:
Abbreviations Used in Caché Object
Page 29 and 30:
Caché ObjectScript CommandsThis do
Page 31 and 32:
BREAKBREAK without an ArgumentArgum
Page 33 and 34:
BREAKNote:BREAK 0 is ineffective in
Page 35 and 36:
DescriptionCLOSE device releases ow
Page 37 and 38:
ArgumentspcAn optional postconditio
Page 39 and 40:
outine with or without parameter pa
Page 41 and 42:
The Argumentless DO CommandThe argu
Page 43 and 44:
DOMainSET x=1,y=2,z=3WRITE !,"In Ma
Page 45 and 46:
The DO command has a postconditiona
Page 47 and 48:
DO WHILE• QUIT command• Argumen
Page 49 and 50:
DO WHILEQUIT and GOTOThe QUIT comma
Page 51 and 52:
ELSEELSEClause of block-oriented IF
Page 53 and 54:
DescriptionFOR is a block-oriented
Page 55 and 56:
FORMainloopFOR {READ !,"Number: ",n
Page 57 and 58:
cution of the loop. The FOR loop te
Page 59 and 60:
a range with initial value, increme
Page 61 and 62:
ArgumentspcAn optional postconditio
Page 63 and 64:
GOTOtestgotoAWRITE !,"running A"DO
Page 65 and 66:
HALTIn the following example, HALT
Page 67 and 68:
HANGNote:You cannot express hangtim
Page 69 and 70:
ELSEIF and ELSE clauses are optiona
Page 71 and 72:
JOBMainloopNEW sex,ageREAD !,"What
Page 73 and 74:
JOBpcroutineroutine-paramsclassname
Page 75 and 76:
have a formal parameter list with t
Page 77 and 78:
JOBParameterprincipal-outputDescrip
Page 79:
a jobbed process, you can use param
Page 82 and 83:
Caché ObjectScript CommandsRemote
Page 84 and 85:
Caché ObjectScript Commands• If
Page 86 and 87:
Caché ObjectScript Commandsserver
Page 88 and 89:
Caché ObjectScript CommandsDescrip
Page 90 and 91:
Caché ObjectScript CommandsNotesKI
Page 92 and 93:
Caché ObjectScript CommandsThe nod
Page 94 and 95:
Caché ObjectScript CommandsLOCK Wi
Page 96 and 97:
Caché ObjectScript Commandslocknam
Page 98 and 99:
Caché ObjectScript Commands• Set
Page 100 and 101:
Caché ObjectScript Commands• ^c
Page 102 and 103:
Caché ObjectScript CommandsLocking
Page 104 and 105:
Caché ObjectScript CommandsMERGEMe
Page 106 and 107:
Caché ObjectScript CommandsInitial
Page 108 and 109:
Caché ObjectScript CommandsNEWCrea
Page 110 and 111:
Caché ObjectScript Commandssaves t
Page 112 and 113:
Caché ObjectScript CommandsIn the
Page 114 and 115:
Caché ObjectScript CommandsOPENAcq
Page 116 and 117:
Caché ObjectScript Commands• Dev
Page 118 and 119:
Caché ObjectScript Commandsmnespac
Page 120 and 121:
Caché ObjectScript CommandsFor som
Page 122 and 123:
Caché ObjectScript Commands• Wit
Page 124 and 125:
Caché ObjectScript CommandsQUITTer
Page 126 and 127:
Caché ObjectScript CommandsQUIT an
Page 128 and 129:
Caché ObjectScript CommandsTest WR
Page 130 and 131:
Caché ObjectScript CommandsThe var
Page 132 and 133:
Caché ObjectScript CommandsNote th
Page 134 and 135:
Caché ObjectScript CommandsA timeo
Page 136 and 137:
Caché ObjectScript CommandsType of
Page 138 and 139:
Caché ObjectScript CommandsReading
Page 140 and 141:
Caché ObjectScript CommandsSETAssi
Page 142 and 143:
Caché ObjectScript Commandswas cre
Page 144 and 145:
Caché ObjectScript Commandswith th
Page 146 and 147:
Caché ObjectScript CommandsFor exa
Page 148 and 149:
Caché ObjectScript CommandsThe fol
Page 150 and 151:
Caché ObjectScript CommandsDescrip
Page 152 and 153:
Caché ObjectScript CommandsTROLLBA
Page 154 and 155:
Caché ObjectScript CommandsArgumen
Page 156 and 157:
Caché ObjectScript CommandsSee Als
Page 158 and 159:
Caché ObjectScript CommandsSET ^a(
Page 160 and 161:
Caché ObjectScript CommandsThe par
Page 162 and 163:
Caché ObjectScript Commandsword) w
Page 164 and 165:
Caché ObjectScript Commands• Log
Page 166 and 167:
Caché ObjectScript Commands• VIE
Page 168 and 169:
Caché ObjectScript CommandsAfter r
Page 170 and 171:
Caché ObjectScript CommandsModen >
Page 172 and 173:
Caché ObjectScript CommandsQUIT an
Page 174 and 175:
Caché ObjectScript CommandsWRITEDi
Page 176 and 177:
Caché ObjectScript CommandsfA form
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Caché ObjectScript CommandsMnemoni
Page 184 and 185:
Caché ObjectScript CommandsCode-1-
Page 186 and 187:
Caché ObjectScript CommandsAfter C
Page 188 and 189:
Caché ObjectScript CommandsXECUTE
Page 191 and 192:
Caché ObjectScript FunctionsA func
Page 193 and 194:
$ASCII$ASCIIReturns the character c
Page 195 and 196:
$ASCIISTSET String="ThIs Is a MiXeD
Page 197 and 198:
$BIT// Set a to [0,0,1,1]SET $BIT(a
Page 199 and 200:
ExamplesIf bitstring= [0,0,1,1,0],
Page 201 and 202:
If bitstring = [0,0,1,1,0], when se
Page 203 and 204:
$BITLOGICNote:When $BITLOGIC is sup
Page 205 and 206:
See Also• $BIT function• $BITCO
Page 207 and 208:
$CHARREAD "Input a number 1-3: ",xS
Page 209 and 210:
$CHARABCACYou can use decimal numer
Page 211 and 212:
$DATAStatusValue011011MeaningThe va
Page 213 and 214:
$DATAWhen executed, this code might
Page 215 and 216:
Because numbers generated by $DOUBL
Page 217 and 218:
$EXTRACT$EXTRACTExtracts specified
Page 219 and 220:
is an asterisk, $EXTRACT returns th
Page 221 and 222:
$EXTRACTSET x="ABCD"SET $EXTRACT(x,
Page 223 and 224:
$FACTOR• $ZEXP function• $ZLN f
Page 225 and 226:
$FIND$FINDFinds a substring by valu
Page 227 and 228:
$FNUMBER• $LIST function• $PIEC
Page 229 and 230:
You can include the decimal option
Page 231 and 232:
$GET$GETReturns the data value of a
Page 233 and 234:
$GETIF $GET(^client(i))="" { QUIT }
Page 235 and 236:
The num parameter can be a positive
Page 237 and 238:
$INCREMENTKILL xyzWRITE !,$INCREMEN
Page 239 and 240:
DescriptionThe $INUMBER function va
Page 241 and 242:
$INUMBER• No sign or parentheses.
Page 243 and 244:
In the following example, $INUMBER
Page 245 and 246:
$ISVALIDNUMSET a="certainly not an
Page 247 and 248:
$ISVALIDNUMmin and maxYou can speci
Page 249 and 250:
$NORMALIZE parses multiple trailing
Page 251 and 252:
the end of width. If the expression
Page 253 and 254:
In the following example, the first
Page 255 and 256:
$LIST• $LIST(list) returns the fi
Page 257 and 258:
If the value of the position parame
Page 259 and 260:
$LISTBUILDresults of $LISTBUILD are
Page 261 and 262:
In the following example, ZZDUMP sh
Page 263 and 264:
$LISTFINDSET x=$CHAR(0,0,0,1,16,27,
Page 265 and 266:
If the value of the startafter para
Page 267 and 268:
$LISTGET• $LISTFIND function• $
Page 269 and 270:
If the value of the position parame
Page 271 and 272:
$LISTNEXT$LISTNEXTRetrieves element
Page 273 and 274:
Description$LISTSAME compares the c
Page 275 and 276:
$LISTTOSTRING• $LISTNEXT• $LIST
Page 277 and 278:
$NAME$NAMEReturns the name value of
Page 279 and 280:
with a naked reference to return th
Page 281 and 282:
$NEXT$NEXTReturns the value of the
Page 283 and 284:
The scale parameter value causes th
Page 285 and 286:
• Trailing + and - signs: Both fu
Page 287 and 288:
• Rounding factor: an integer ind
Page 289 and 290:
leading and trailing zeros, and del
Page 291 and 292:
For unsubscripted local variables,
Page 293 and 294:
$ORDER$ORDER Uses Naked Global Refe
Page 295 and 296:
ParametersplistThe target string fr
Page 297 and 298:
In the following example, both $PIE
Page 299 and 300:
The following examples also returns
Page 301 and 302:
$QLENGTH$QLENGTHReturns the number
Page 303 and 304:
$QSUBSCRIPTCode< -1-10nReturn Value
Page 305 and 306:
ExampleThis example presents a gene
Page 307 and 308:
function uses a naked reference to
Page 309 and 310:
$REVERSE$REVERSEReturns the charact
Page 311 and 312:
or immediately after a $SELECT func
Page 313 and 314:
If successful, $SORTBEGIN returns a
Page 315 and 316:
$STACKDOXECUTE$$ECODEReturned when
Page 317 and 318:
$STACK$STACK Code String Arguments
Page 319 and 320:
$TEXTroutineIf specified alone, it
Page 321 and 322:
$TRANSLATE$TRANSLATEPerforms charac
Page 323 and 324:
$VIEW$VIEWReturns the contents of m
Page 325 and 326:
double quotes. If the length parame
Page 327 and 328:
$VIEWStart OPEN 63WRITE !,"Opening
Page 329 and 330:
Math and Time FunctionsThe followin
Page 331 and 332:
$ZARCSINREAD "Input a number: ",num
Page 333 and 334:
$ZCOS210-1returns 1.107148717794090
Page 335 and 336:
ParametersnAn angle in radians, spe
Page 337 and 338:
$ZDATE$ZDATEValidates date and conv
Page 339 and 340:
ParametershdateThe internal date fo
Page 341 and 342:
$ZDATE“Jan Feb Mar Apr May Jun Ju
Page 343 and 344:
$ZDATEerroptThis parameter suppress
Page 345 and 346:
oth of the above lines generate a
Page 347 and 348:
$ZDATE• $ZDATETIME function• $Z
Page 349 and 350:
is a date, the second integer is a
Page 351 and 352:
$ZDATEHSyntaxMmmmmMeaningFull name
Page 353 and 354:
When yearopt=5, endwin is a numeric
Page 355 and 356:
• If you specify an invalid dform
Page 357 and 358:
• You can use the $ZDATEH functio
Page 359 and 360:
• $ZDATETIME(hdatetime) returns t
Page 361 and 362:
$ZDATETIMEtformatA numeric value th
Page 363 and 364:
$ZDATETIMEThe monthlist string has
Page 365 and 366:
$ZDATETIMEmindateA numeric value th
Page 367 and 368:
ODBC date format (dformat=3) will a
Page 369 and 370:
$ZDATETIMEH$ZDATETIMEHValidates dat
Page 371 and 372:
$ZDATETIMEH• The format Mmm DD YY
Page 373 and 374:
$ZDATETIMEHValue678MeaningExpress t
Page 375 and 376:
$ZDATETIMEHstartwinA numeric value
Page 377 and 378:
• If you specify an otherwise val
Page 379 and 380:
$ZEXP$ZEXPReturns the natural logar
Page 381 and 382:
ParametersnumA string value or a nu
Page 383 and 384:
ExamplesThe following example write
Page 385 and 386:
$ZPOWERgenerates an error.See Also
Page 387 and 388:
values to the corresponding multipl
Page 389 and 390:
an error. You can use the absolute
Page 391 and 392:
$ZTIME$ZTIMEConverts the internal s
Page 393 and 394:
In the examples that follow, Htime
Page 395 and 396:
$ZTIMEH$ZTIMEHConverts a time value
Page 397:
$ZTIMEHTime DelimiterBy default, Ca
Page 400 and 401:
Routine, Debugging, and Other Comma
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Caché ObjectScript Special Variabl
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 515 and 516:
Structured System VariablesA struct
Page 517 and 518:
the $ZNSPACE special variable to de
Page 519 and 520:
^$JOB• ZNSPACE command• $ZNSPAC
Page 521 and 522:
^$LOCKSET x=$QUERY(^$JOB(""))WRITE
Page 523 and 524:
The following example tests for the
Page 525 and 526:
DescriptionYou can use the ^$ROUTIN
Page 527:
^$ROUTINE• $ORDER function• $QU
Page 530 and 531:
System and Other Functionsnumbers,
Page 532 and 533:
System and Other FunctionsThe bit_o
Page 534 and 535:
System and Other FunctionsWRITE $ZB
Page 536 and 537:
System and Other Functions$ZCONVERT
Page 538 and 539:
System and Other FunctionsEncoding
Page 540 and 541:
System and Other FunctionsDescripti
Page 542 and 543:
System and Other FunctionsNote that
Page 544 and 545:
System and Other FunctionsDeclarati
Page 546 and 547:
System and Other Functionstypedef s
Page 548 and 549:
System and Other FunctionsError Mes
Page 550 and 551:
System and Other Functions$ZF(-2)Ex
Page 552 and 553:
System and Other Functions$ZF(-3) c
Page 554 and 555:
System and Other FunctionsEstablish
Page 556 and 557:
Page 558 and 559:
System and Other Functions$ZISWIDEC
Page 560 and 561:
System and Other FunctionsSee Also
Page 562 and 563:
System and Other FunctionsParameter
Page 564 and 565:
System and Other FunctionslangAn in
Page 566 and 567:
System and Other FunctionsZNSPACE "
Page 568 and 569:
System and Other Functions$ZPOSITIO
Page 570 and 571:
System and Other FunctionsSee Also
Page 572 and 573:
Page 574 and 575:
System and Other FunctionsFor VMS,
Page 576 and 577:
System and Other Functions$ZSTRIPRe
Page 578 and 579:
System and Other FunctionsSET str="
Page 580 and 581:
System and Other FunctionsReturn Va
Page 582 and 583:
System and Other FunctionsThus, if
Page 584 and 585:
Page 586 and 587:
System and Other FunctionsYou can u
Page 588 and 589:
System and Other FunctionsExamplesT
Page 590 and 591:
System and Other Functions$ZUTIL(18
Page 592 and 593:
System and Other FunctionsSET A="Fr
Page 594 and 595:
System and Other FunctionsthirdSpec
Page 596 and 597:
Page 598 and 599:
System and Other FunctionsExampleWR
Page 600 and 601:
System and Other FunctionsDatabase
Page 602 and 603:
System and Other FunctionsCluster L
Page 604 and 605:
System and Other FunctionsDirectory
Page 606 and 607:
System and Other FunctionsAny form
Page 608 and 609: System and Other FunctionsDescripti
Page 610 and 611: System and Other Functions• $ZUTI
Page 612 and 613: System and Other FunctionsSubfuncti
Page 614 and 615: System and Other FunctionsExampleTh
Page 618 and 619: System and Other Functions• $ZUTI
Page 620 and 621: System and Other FunctionsParameter
Page 622 and 623: System and Other FunctionsError on
Page 624 and 625: System and Other FunctionsSee Also
Page 626 and 627: System and Other FunctionsWhen a ne
Page 628 and 629: System and Other FunctionsUSER>XECU
Page 630 and 631: System and Other FunctionsCaché pr
Page 638 and 639: System and Other FunctionsThis func
Page 640 and 641: System and Other Functions$ZUTIL(68
Page 646 and 647: System and Other FunctionsSubfuncti
Page 650 and 651: System and Other Functions• $GET
Page 654 and 655: System and Other Functionsor "RW" m
Page 656 and 657: System and Other FunctionsReading f
Page 666 and 667: System and Other Functionsprincipal
Page 670 and 671: System and Other FunctionsTCOMMIT c
Page 680 and 681: System and Other Functionsa $ZDATE
Page 688 and 689: System and Other FunctionsThis conf
Page 692 and 693: System and Other FunctionsNotes$ZUT
Page 696 and 697: System and Other FunctionsWRITE $ZD
Page 702 and 703: System and Other FunctionsEvery tim
Page 708 and 709:
Page 710 and 711:
System and Other Functions• $TEST
Page 712 and 713:
System and Other FunctionsValue6789
Page 714 and 715:
Page 716 and 717:
System and Other Functionsreturns:
Page 718 and 719:
Page 720 and 721:
Page 722 and 723:
Page 724 and 725:
System and Other FunctionsFlag67891
Page 726 and 727:
System and Other Functions• $ZUTI
Page 728 and 729:
System and Other Functions8: regula
Page 730 and 731:
System and Other FunctionsUSER>WRIT
Page 732 and 733:
System and Other Functionsas the cu
Page 734 and 735:
System and Other Functions• Go to
Page 736 and 737:
System and Other FunctionsNote:Beca
Page 738 and 739:
Page 740 and 741:
System and Other Functions• $ZUTI
Page 742 and 743:
System and Other FunctionsExampleTh
Page 744 and 745:
System and Other Functions• $ZLCH
Page 746 and 747:
System and Other FunctionsConversio
Page 748 and 749:
System and Other Functions$ZZENKAKU
Page 750 and 751:
The %ZLANG Language Extension Libra
Page 753 and 754:
Legacy Commands and FunctionsLegacy
Page 755 and 756:
DescriptionDO (legacy version)Note:
Page 757 and 758:
When a block ends, as indicated by
Page 759 and 760:
See Also• DO command• $TEST spe
Page 761 and 762:
FOR (legacy version)increment is po
Page 763 and 764:
len-2, only the last character will
Page 765 and 766:
FOR (legacy version)Incrementing wi
Page 767 and 768:
IF (legacy version)IF (legacy versi
Page 769 and 770:
DescriptionZQUIT (legacy command)No
Page 771 and 772:
ZQUIT (legacy command)For example:Z
Page 773 and 774:
$ZBITFIND (legacy function)$ZBITCOU
Page 775 and 776:
ParameterspositionValue or expressi
Page 777 and 778:
esulting bitstring is 1 in all posi
Page 779 and 780:
DescriptionThis page describes the
Page 781 and 782:
Page 783 and 784:
$ZUTIL(67,4) (legacy function)• $
Page 785 and 786:
$ZUTIL(67,5) (legacy function)pstat
Page 787 and 788:
$ZUTIL(67,6) (legacy function)$ZUTI
Page 789 and 790:
$ZUTIL(67,7,pid) returns a string c
Page 791 and 792:
Page 793 and 794:
Code6064687276808488961041081161401
Page 795 and 796:
$ZUTIL(67,12) (legacy function)$ZUT
Page 797 and 798:
ParameterspidA process ID number. T
Page 799 and 800:
ExamplesThe following is the hexade
Page 801 and 802:
SYS.Process MethodsYou can get the
Page 803 and 804:
See Also$ZUTIL(133) (legacy functio
Page 805 and 806:
or a counter's name or description
Page 807 and 808:
$ZUTIL(133) (legacy function)1. Cal
show all

Caché ObjectScript Reference - InterSystems Documentation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?