EUROPEThis product complies with the requirements of European Directives89/336/EEC and 73/23/EEC, and conforms with EN55022 Class A(emissions) and EN50082-1 (susceptibility).Mains adaptors used to power this product must comply withEN60950, EN60742 or EN61010.AUSTRALIA & NEW ZEALANDThis product complies with the requirements of Australian andNew Zealand standard for EMC emissions AS/NZS 3548:1992ACN Class A.006 134 863USAThis device complies with Part 15 of the FCC rules. Operation issubject to the following two conditions: (1) this device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation.CANADAThis digital apparatus does not exceed the Class A limits forradio noise emissions from digital apparatus as set out in theRadio Interference Regulations of the Canadian Department ofCommunications.Le présent appareil numérique n’émet pas de bruitsradioélectriques dépassant les limites applicables aux appreilsnumériques de la Classe A prescrites dans les règlements sur lebrouillage radioélectrique édictés par le Ministère desCommunications du Canada.CAUTION — USE APPROVED ANTI-STATIC PROCEDURESThe input circuitry of this device is extremely sensitive and thereforesusceptible to damage by static electricity. Always follow approved antistaticprocedures when working with this device.CV-0002-<strong>A0</strong>.S02
Data Electronics ContentsWarrantyData Electronics warrants the instruments it manufactures against defects in either the materials or theworkmanship for a period of 3 years from the date of delivery to the original customer. This warranty islimited to the replacement or repair of such defects, without charge, when the instrument is returned toData Electronics or to one of its authorized dealers.This warranty excludes all other warranties, either express or implied, and is limited to a value notexceeding the purchase price of the instrument.Data Electronics shall not be liable for any incidental or consequential loss or damages resulting fromthe use of the instrument, or for damage to the instrument resulting from accident, abuse, improperimplementation, lack of reasonable care, or loss of parts.Where Data Electronics supplies to the customer equipment or items manufactured by a third party,then the warranty provided by the third party manufacturer remains.WarningData Electronics products are not authorized for use as critical components in any life support systemwhere failure of the product is likely to effect its safety or effectiveness.TrademarksDatataker is a trademark of Data Electronics (Aust.) Pty. Ltd.IBM PC, IBM XT, IBM AT and IBM PS/2 are trademarks of International Business Machines Corp.Macintosh is a trademark of Apple Computer, Inc.Windows is a trademark of Microsoft Corp.PC Card and PCMCIA are trademarks of the Personal Computer Memory Card Industry Association.Firmware (ROM) VersionsThis manual is applicable to the Series 2Datataker data loggers fitted with firmwareversion 5.xx.The version number is returned in the firstline of the TEST command — see “MoreCommands”.See “Firmware Change History” forcompatibility with the earlier firmwareversions.Related Documents:Getting Started with DatatakerReference <strong>Manual</strong>Advanced Communications <strong>Manual</strong>Related Products:DeTerminal for DOSDeTerminal for WindowsDeLoggerDeLogger ProDeCopy / DeImageDeLink DDE ServerPanel Mount DisplaySensor Simulation PanelMemory CardsMemory Card InterfaceData Electronics (Aust.) Pty Ltd7 Seismic CourtRowville, VIC, 3178AustraliaTel +61 (3) 9764-8600Fax +61 (3) 9764-8997E-mail datataker@dataelec.com.auData Electronics USA Inc22961 Triton Way, Suite E,Laguna Hills, CA92653USAInternet Home Page: http://www.datataker.com/~dtakerTel +1 (714) 452-0750Fax +1 (714) 452-1170E-mail deusa@datataker.comData Electronics (UK)Unit 26, Business Centre WestAvenue OneLetchworth Garden CityHertfordshire SG6 2HBEngland, UKTel +44 (1462) 481 291Fax +44 (1462) 481 375E-mail.Page 123456789101112131415161718192021222324252627282930343536Getting StartedMore Getting StartedSchedulesChannel TypesChannel OptionsTime and Other Channels, Statistical OperationsScaling Data and CalculationsData Logging and Retrieval, Memory Cards and ProgramsAlarmsOutput Format, More CommandsParameters, SwitchesDisplay Panel OperationCOMMS PortNetworkingPower and Battery ConnectionSensors 1 — Thermocouples, Thermistors, RTDsSensors 2 — Hints, IC Temperature Sensors, BridgesSensors 3, Other SubjectsAnalog Input Configurations 1Analog Input Configurations 2, Digital ConfigurationsError MessagesSimplified CircuitGlossaryAppendix — Datataker DT50Appendix — Datataker <strong>DT500</strong> and DT600Appendix — Datataker DT505 and DT605Appendix — Geologger DT515 and DT615Appendix — Channel Expansion ModuleAppendix — Memory Card Processing (Flow Chart)Appendix — Datataker SpecificationsAppendix — Firmware Change History, NotesAppendix — Accuracy of the Datataker Data LoggersIndexDatataker <strong>Manual</strong> — A <strong>Concise</strong> Reference <strong>UM</strong>-<strong>0046</strong>-<strong>A0</strong>© Data Electronics (Aust.) Pty. Ltd. 1991–1996