S3.15 Strength System Base Owner's Manual - Precor

More documents

Recommendations

Info

S3.15 Assembly and Maintenance Guide2. Assemble Leg ExtensionA. Attach the Leg Extension to the Main Base usingtwo 2½-inch boltstwo spring washersWrench tighten.B. Insert the 2-inch threaded shaft into the LegExtension Arm.BThreadedShaftC. Attach the Leg Extension Arm to the LegExtension usingtwo ¹⁄₂-inch x ¾-inch buttonhead boltstwo flat washersWrench tighten using the 8mm hex keys.Leg Extension ArmA2 - 2½" bolts2 - spring washers2 - ¹⁄₂" x ¾-inchbuttonhead bolts2 - washersCMain BaseLegExtensionLeg Extension Arm1 2 3 4 5 6Step 2. Assemble Leg Extensionpage 10
S3.15 Assembly and Maintenance Guide3. Install Seat and RollersA. Attach the Seat Pad to the Seat Stem usingfour 1-inch zinc buttonhead boltstwo zinc flat washersWrench tighten using a 6mm hex key.B. Insert the Seat Stem into the Seat UprightAssembly. Pull out the seat adjustment pin toinsert the stem. Place the Seat Stem at its lowestposition.C. Attach the Back Pad to the Main Upright usingtwo 2½-inch hex head boltstwo flat washersWrench tighten.2 - 2½" bolts2 - washersCBackPadSeat PadSeat StemA4 - 1" zincbuttonhead bolts2 - zinc washersPull out the seatadjustment pin toinsert stem.B1 2 3 4 5 6Step 3. Install Seat and Rollerspage 11
Page 1 and 2: S3.15Strength-TrainingFitness Equip
Page 3 and 4: S3.15 Assembly and Maintenance Guid
Page 5: S3.15 Assembly and Maintenance Guid
Page 33 and 34: Precor Incorporated20031 142nd Aven
Page 36: S3.15 SpecificationsLength: 72 inch

S3.15 Strength System Base Owner's Manual - Precor

Create successful ePaper yourself

Delete template?

Save as template?