S3.15 Strength System Base Owner's Manual - Precor
S3.15 Strength System Base Owner's Manual - Precor
S3.15 Strength System Base Owner's Manual - Precor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>S3.15</strong> Assembly and Maintenance GuideD. For ease of assembly, disassemble and removethe top pulley and its fasteners on the MainUpright.EAlign Top Beam withuprights.E. Install the Top Beam on the Rear and MainUprights and reinstall the top pulley and fastenerassembly.Top BeamNote: If necessary, use a rubber mallet to align themounting holes.F. Secure the Top Beam to the Rear Upright usingtwo 2¹⁄₄-inch hex head boltsfour flat washerstwo locknutsG. Secure the Top Beam to the Main Upright usingtwo 4-inch hex head boltsfour radius washerstwo locknutsNote: Make sure the radius washers lie flat againstthe Main Upright before wrench tightening.H. Wrench tighten all bolts. Start with the fastenersthat secure the Top Beam and follow the order ofthe assembled steps in reverse.RearUprightMainUprightDJ2 - 2¹⁄₄" bolts4 - washers2 - locknutsFG2 - 4" bolts4 - radius washers2 - locknutsJ. Replace the top pulley and finger tighten thefasteners.1 2 3 4 5 6Step 1. Assemble Main Structure, continuedpage 9
Change language