S3.15 Strength System Base Owner's Manual - Precor

More documents

Recommendations

Info

<strong>S3.15</strong> Assembly and Maintenance GuideD. Orient the hole in the Top Cap Weight with thecurve in the weight plates. Place the Top CapWeight onto the Guide Rods and slide the SelectorStem into the weight stack.E. Slide the Guide Rod Bracket onto the Guide Rodsand secure it to the Upper Frame Crosspiece usingtwo ³⁄₄-inch buttonhead boltstwo flat washersWrench tighten.DGuideRodTop CapWeightE2 - ¾" buttonheadbolts2 - washersUpper FrameCrosspieceGuide Rod BracketSelectorStem1 2 3 4 5 6Step 4. Assemble Weight Stack, continuedpage 14
<strong>S3.15</strong> Assembly and Maintenance Guide5. Assemble Press ArmImportant: Obtain adult assistance to attach the PressArm Assembly.A. Attach the Press Arm Assembly, with the labelfacing out, to the Top Beam usingone threaded shafttwo 1-inch buttonhead boltstwo zinc flat washersWrench tighten.1 - threaded shaft2 - 1" buttonhead bolts2 - zinc washersTop BeamALabel on Press Arm AssemblyPress ArmAssembly1 2 3 4 5 6Step 5. Assemble Press Armpage 15
Page 1 and 2: S3.15Strength-TrainingFitness Equip
Page 3 and 4: S3.15 Assembly and Maintenance Guid
Page 5: S3.15 Assembly and Maintenance Guid
Page 33 and 34: Precor Incorporated20031 142nd Aven
Page 36: S3.15 SpecificationsLength: 72 inch

S3.15 Strength System Base Owner's Manual - Precor

Create successful ePaper yourself

Delete template?

Save as template?