S3.15 Strength System Base Owner's Manual - Precor

S3.15 Assembly and Maintenance Guide4. Assemble Weight StackImportant: Obtain adult assistance before installingthe Guide Rods and Weights.A. Place the Guide Rods into the two outside holes inthe Main Base.CAUTION: The lubricant on the Guide Rods canstain clothes. Wear proper attire when workingwith or lubricating the Guide Rods.B. Place one Guide Rod Spacer and one WeightCushion on each Guide Rod and allow it to slidedown and rest on the Main Base.Note: Guide Rod Spacers do not need to beinstalled if the Heavy Stack Option is purchasedthrough your dealer.C. Add the 10-lb weights. For ease of weight pinplacement and use, orient the curve on the weightplate to the desired side of the unit. Position theweight plate so the plastic bushing is on top andhold your finger over the plastic bushing to preventit from popping out.CAUTION: The weights are heavy! Handlethe weights carefully so as not to drop themor injure yourself. Pick up and place oneweight at a time on the Guide Rods. Do notangle the Guide Rods to such a degree thatthey dislodge the Guide Rod Spacers orWeight Cushions. Have someone hold theGuide Rods in place while you slide theweights on the stack.WeightCushionsBAGuide RodGuide Rod Spacers(Do not install spacers if youpurchased the Heavy Stack Option.)WeightC1 2 3 4 5 6Step 4. Assemble Weight Stackpage 13