S3.15 Strength System Base Owner's Manual - Precor
S3.15 Strength System Base Owner's Manual - Precor
S3.15 Strength System Base Owner's Manual - Precor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>S3.15</strong> Assembly and Maintenance GuideD. Orient the hole in the Top Cap Weight with thecurve in the weight plates. Place the Top CapWeight onto the Guide Rods and slide the SelectorStem into the weight stack.E. Slide the Guide Rod Bracket onto the Guide Rodsand secure it to the Upper Frame Crosspiece usingtwo ³⁄₄-inch buttonhead boltstwo flat washersWrench tighten.DGuideRodTop CapWeightE2 - ¾" buttonheadbolts2 - washersUpper FrameCrosspieceGuide Rod BracketSelectorStem1 2 3 4 5 6Step 4. Assemble Weight Stack, continuedpage 14