S3.15 Strength System Base Owner's Manual - Precor

S3.15 Assembly and Maintenance Guide11. Attach AccessoriesA. At the end of the Top Beam, attach the Lat Bar tothe Main Cable using a spring clip.Note: The two small hooks at the end of the TopBeam can be used to store the Lat Bar when it’snot in use.B. Install the Triceps Straps to the Ab Cable using thespring clip.To vary your exercise routine, you can replace theLat Bar and attach the Triceps Straps to the MainCable.C. Attach the Curl Bar to the Leg Extension Cableusing the short piece of chain and two spring clips(installed at each end of the chain).To work out leg muscle groups, you can attach aSoft Ankle Strap, to the end of the cable, instead ofthe curl bar.D. For aesthetics, insert plastic plugs into the unusedmounting holes in the Top Beam, Main Base, andRear Crossbar.ALatBarCurlBarTricepsStrapBCAnkleStrap1 2 3 4 5 6Step 11. Attach Accessoriespage 24