P3838_3 Mira Fino.pmd - QS Supplies

Backplate5. Make good the wall surface, allowing fortwo circular recesses measuring 32 mmdiameter x 10 mm depth, to accept thetwo pipework concealing plates.Fit the pipework concealing plates overhot and cold water supply pipework.6. Thoroughly flush the incoming hot andcold water supply pipes beforeconnecting the shower control. Failureto do so may result in productmalfunction.7. Slip the compression nuts and olivesover the supply pipes.Compression Nut8. Locate the shower control body onto thebackplate and inlet supply pipework,then secure by tightening, clockwise,the two recessed grub screws, using the3 mm A/F hexagon wrench (supplied).Tighten the compression nuts, using ifnecessary, a cloth to protect the platedsurfaces.Turn on the water supplies and checkfor any leaks!9. This completes the installation of theMira Fino for “Back Inlet Supplies”.17