11.07.2015 Views

P3838_3 Mira Fino.pmd - QS Supplies

P3838_3 Mira Fino.pmd - QS Supplies

P3838_3 Mira Fino.pmd - QS Supplies

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Section1 IntroductionThank you for purchasing a quality <strong>Mira</strong> product. To enjoy the full potential of your newproduct, please take time to read this guide thoroughly, having done so, keep it handy forfuture reference.The <strong>Mira</strong> <strong>Fino</strong> is a thermostatic shower control with independent selection of spray forceand temperature. The shower control incorporates a wax capsule temperature sensingunit. This provides an almost immediate response to changes in pressures or temperatureof the incoming water supplies to maintain the selected temperature. An adjustablemaximum temperature stop is provided which limits the temperature to the desired level.An override button allows the user to exceed the preset maximum temperature. The flowcontrol utilizes ceramic plate technology operating directly on the outlet to provideprecise control and isolation of the water outlet. The <strong>Mira</strong> <strong>Fino</strong> also includes checkvalvesand strainers.Shower controls covered by this guide:<strong>Mira</strong> <strong>Fino</strong>An exposed shower control for connection to exposed (rising or falling) or rear entrypipework.<strong>Mira</strong> <strong>Fino</strong> BA built-in shower control for connection to concealed pipework.Section2Warning!Important Safety InformationImportant Safety Information1SectionProducts manufactured by us are safe provided they are installed, used and maintainedin good working order in accordance with our instructions and recommendationsCaution!1. Read all of these instructions.2. Retain this guide for later use.3. Pass on this guide in the event of change of ownership of the installation site.4. Follow all warnings, cautions and instructions contained in this guide.5. The plumbing installation must comply with the requirements of UK Water Regulations/Byelaws (Scotland), Building Regulations or any particular regulations and practices,specified by the local water supplier. The installation should be carried out by aplumber or contractor who is registered or is a member of an association suchas:- Institute of Plumbing (IOP), throughout the UK.- National Association of Plumbing, Heating and Mechanical Services Contractors(NAPH & MSC), England and Wales.- Scottish and Northern Ireland Plumbing Employers’ Federation(SNIPEF), Scotland and Northern Ireland.6. Anyone who may have difficulty understanding or operating the controls of any showershould be attended whilst showering. Particular consideration should be given to theyoung, the elderly, the infirm, or anyone inexperienced in the correct operation of thecontrols.3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!