CAGE PROCESSING in Animal Facilities - Felasa

7.2.1.1.2 Test setup1 inside at the long side wall, horizontal (A)1 inside in a corner (B)1 inside mid-floor (C), 1 outside mid-floor (D)1 outside at the long side wall, horizontal (E)7.2.1.2 Wire lids7.2.1.2.1 Number of test strips per wire lid2 test strips per wire lidFig. 7-3 Position of test strips on wire lid7.2.1.2.2 Test setup1 at the feed depression (at the lowest point) (A)1 on the flat wire surface (inside) (B)7.2.1.3 Racks (cage racks as well as storage and transport racks)7.2.1.3.1 Number of test strips per rack6 test strips per IVC rack8 test strips per storage and transport rackADBECFFig. 7-4 Position of test strips on cage rackCage Processing in Animal Facilities · 4th issue · 2013 49