Operation instruction - Asennustuotteet

More documents

Recommendations

Info

ABB i-bus ® KNXCommissioningNo. Function Object name Data type Flags17 Enable storing Input A:Control scene1 bitDPT 1.003C, WThis communication object appears only with the option on long operation and object value =1. This object can be set in the parameter Store scene. This communication object is used totrigger saving of a scene via the bus. The function depends on the method of storing thescene.18 Store scene indication Input A:Control scene1 bitDPT 1.003C, TThis communication object is used to indicate saving of a scene, e.g. by an LED. The functiondepends on the method of storing the scene.19 Restore scene todefaultInput A:Control scene1 bitDPT 1.003C, R, W, TThis communication object is used to restore a scene to the default settings.© 2011 ABB STOTZ-KONTAKT GmbH 104
ABB i-bus ® KNXCommissioning3.2.13 Operating modeSwitching sequencesA switching sequence facilitates a step-by-step change of up to fiveswitching objects with just a single input actuation. In this way, up to 5actuators or actuator groups can be switched in a defined switchingsequence.In this chapter, you will find all descriptions for the parameter windows andthe corresponding communication objects for operating mode Switchingsequences.NoteThe inputs B…X do not differ from input A.The descriptions of the parameter setting possibilities and the adjustablecommunication objects for the inputs B…X should be taken from thedescriptions from parameter window Enable Inputs A…X, page 50!© 2011 ABB STOTZ-KONTAKT GmbH 105
Page 1:
kgABB i-bus ® KNXBinary Inputs BE/
Page 7 and 8:
ABB i-bus ® KNXGeneral1 GeneralAll
Page 9 and 10:
ABB i-bus ® KNXGeneral1.2 Product
Page 11 and 12:
ABB i-bus ® KNXDevice technology2
Page 13 and 14:
ABB i-bus ® KNXDevice technology2.
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
ABB i-bus ® KNXCommissioning3 Comm
Page 35 and 36:
ABB i-bus ® KNXCommissioning3.1.1.
Page 37 and 38:
ABB i-bus ® KNXCommissioning3.1.2.
Page 39 and 40:
ABB i-bus ® KNXCommissioningCopyTh
Page 41 and 42:
ABB i-bus ® KNXCommissioning3.2.1
Page 43 and 44:
ABB i-bus ® KNXCommissioningLimit
Page 45 and 46:
Page 47 and 48:
ABB i-bus ® KNXCommissioningSend o
Page 49 and 50:
Page 51 and 52:
ABB i-bus ® KNXCommissioningNo. Fu
Page 53 and 54:
ABB i-bus ® KNXCommissioningDesign
Page 55 and 56: ABB i-bus ® KNXCommissioning3.2.8.
Page 57 and 58: ABB i-bus ® KNXCommissioningWhat i
Page 61 and 62: ABB i-bus ® KNXCommissioningCyclic
Page 67 and 68: ABB i-bus ® KNXCommissioningCommun
Page 69 and 70: ABB i-bus ® KNXCommissioningNo. Fu
Page 73 and 74: ABB i-bus ® KNXCommissioningFuncti
Page 75 and 76: ABB i-bus ® KNXCommissioningDimmin
Page 79 and 80: ABB i-bus ® KNXCommissioning3.2.10
Page 81 and 82: ABB i-bus ® KNXCommissioningOperat
Page 89 and 90: ABB i-bus ® KNXCommissioningDistin
Page 93 and 94: ABB i-bus ® KNXCommissioningsent v
Page 101 and 102: ABB i-bus ® KNXCommissioningStore
Page 105: ABB i-bus ® KNXCommissioningNo. Fu
Page 109 and 110: ABB i-bus ® KNXCommissioningCapaci
Page 111 and 112: ABB i-bus ® KNXCommissioningNumber
Page 113 and 114: ABB i-bus ® KNXCommissioningSwitch
Page 121 and 122: ABB i-bus ® KNXCommissioningSend v
Page 131 and 132: ABB i-bus ® KNXCommissioningMain C
Page 133 and 134: ABB i-bus ® KNXCommissioningChange
Page 135 and 136: ABB i-bus ® KNXCommissioningExampl
Page 141 and 142: ABB i-bus ® KNXPlanning and applic
Page 149: ABB i-bus ® KNXPlanning and applic
Page 152 and 153: ABB i-bus ® KNXAppendixA.2 Input4
Page 154 and 155: ABB i-bus ® KNXAppendixA.4 Code ta
Page 156 and 157:
ABB i-bus ® KNXAppendixA.6 Notes©
Page 158:
ABB i-bus ® KNXAppendixA.8 Notes©
show all

Operation instruction - Asennustuotteet

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?